15 KiB

Raw Blame History

title	description
Microsoft Azure Blob Storage	Rclone docs for Microsoft Azure Blob Storage

{{< icon "fab fa-windows" >}} Microsoft Azure Blob Storage

Paths are specified as remote:container (or remote: for the lsd command.) You may put subdirectories in too, e.g. remote:container/path/to/dir.

Configuration

Here is an example of making a Microsoft Azure Blob Storage configuration. For a remote called remote. First run:

 rclone config

This will guide you through an interactive setup process:

No remotes found, make a new one?
n) New remote
s) Set configuration password
q) Quit config
n/s/q> n
name> remote
Type of storage to configure.
Choose a number from below, or type in your own value
[snip]
XX / Microsoft Azure Blob Storage
   \ "azureblob"
[snip]
Storage> azureblob
Storage Account Name
account> account_name
Storage Account Key
key> base64encodedkey==
Endpoint for the service - leave blank normally.
endpoint> 
Remote config
--------------------
[remote]
account = account_name
key = base64encodedkey==
endpoint = 
--------------------
y) Yes this is OK
e) Edit this remote
d) Delete this remote
y/e/d> y

See all containers

rclone lsd remote:

Make a new container

rclone mkdir remote:container

List the contents of a container

rclone ls remote:container

Sync /home/local/directory to the remote container, deleting any excess files in the container.

rclone sync -i /home/local/directory remote:container

--fast-list

This remote supports --fast-list which allows you to use fewer transactions in exchange for more memory. See the rclone docs for more details.

Modified time

The modified time is stored as metadata on the object with the mtime key. It is stored using RFC3339 Format time with nanosecond precision. The metadata is supplied during directory listings so there is no overhead to using it.

Performance

When uploading large files, increasing the value of --azureblob-upload-concurrency will increase performance at the cost of using more memory. The default of 16 is set quite conservatively to use less memory. It maybe be necessary raise it to 64 or higher to fully utilize a 1 GBit/s link with a single file transfer.

Restricted filename characters

In addition to the default restricted characters set the following characters are also replaced:

Character	Value	Replacement
/	0x2F	／
\	0x5C	＼

File names can also not end with the following characters. These only get replaced if they are the last character in the name:

Character	Value	Replacement
.	0x2E	．

Invalid UTF-8 bytes will also be replaced, as they can't be used in JSON strings.

Hashes

MD5 hashes are stored with blobs. However blobs that were uploaded in chunks only have an MD5 if the source remote was capable of MD5 hashes, e.g. the local disk.

Authenticating with Azure Blob Storage

Rclone has 3 ways of authenticating with Azure Blob Storage:

Account and Key

This is the most straight forward and least flexible way. Just fill in the account and key lines and leave the rest blank.

SAS URL

This can be an account level SAS URL or container level SAS URL.

To use it leave account, key blank and fill in sas_url.

An account level SAS URL or container level SAS URL can be obtained from the Azure portal or the Azure Storage Explorer. To get a container level SAS URL right click on a container in the Azure Blob explorer in the Azure portal.

If you use a container level SAS URL, rclone operations are permitted only on a particular container, e.g.

rclone ls azureblob:container

You can also list the single container from the root. This will only show the container specified by the SAS URL.

$ rclone lsd azureblob:
container/

Note that you can't see or access any other containers - this will fail

rclone ls azureblob:othercontainer

Container level SAS URLs are useful for temporarily allowing third parties access to a single container or putting credentials into an untrusted environment such as a CI build server.

{{< rem autogenerated options start" - DO NOT EDIT - instead edit fs.RegInfo in backend/azureblob/azureblob.go then run make backenddocs" >}}

Standard options

Here are the standard options specific to azureblob (Microsoft Azure Blob Storage).

--azureblob-account

Storage Account Name.

Leave blank to use SAS URL or Emulator.

Properties:

Config: account
Env Var: RCLONE_AZUREBLOB_ACCOUNT
Type: string
Required: false

--azureblob-service-principal-file

Path to file containing credentials for use with a service principal.

Leave blank normally. Needed only if you want to use a service principal instead of interactive login.

$ az ad sp create-for-rbac --name "<name>" \
  --role "Storage Blob Data Owner" \
  --scopes "/subscriptions/<subscription>/resourceGroups/<resource-group>/providers/Microsoft.Storage/storageAccounts/<storage-account>/blobServices/default/containers/<container>" \
  > azure-principal.json

See "Create an Azure service principal" and "Assign an Azure role for access to blob data" pages for more details.

Properties:

Config: service_principal_file
Env Var: RCLONE_AZUREBLOB_SERVICE_PRINCIPAL_FILE
Type: string
Required: false

--azureblob-key

Storage Account Key.

Leave blank to use SAS URL or Emulator.

Properties:

Config: key
Env Var: RCLONE_AZUREBLOB_KEY
Type: string
Required: false

--azureblob-sas-url

SAS URL for container level access only.

Leave blank if using account/key or Emulator.

Properties:

Config: sas_url
Env Var: RCLONE_AZUREBLOB_SAS_URL
Type: string
Required: false

--azureblob-use-msi

Use a managed service identity to authenticate (only works in Azure).

When true, use a managed service identity to authenticate to Azure Storage instead of a SAS token or account key.

If the VM(SS) on which this program is running has a system-assigned identity, it will be used by default. If the resource has no system-assigned but exactly one user-assigned identity, the user-assigned identity will be used by default. If the resource has multiple user-assigned identities, the identity to use must be explicitly specified using exactly one of the msi_object_id, msi_client_id, or msi_mi_res_id parameters.

Properties:

Config: use_msi
Env Var: RCLONE_AZUREBLOB_USE_MSI
Type: bool
Default: false

--azureblob-use-emulator

Uses local storage emulator if provided as 'true'.

Leave blank if using real azure storage endpoint.

Properties:

Config: use_emulator
Env Var: RCLONE_AZUREBLOB_USE_EMULATOR
Type: bool
Default: false

Advanced options

Here are the advanced options specific to azureblob (Microsoft Azure Blob Storage).

--azureblob-msi-object-id

Object ID of the user-assigned MSI to use, if any.

Leave blank if msi_client_id or msi_mi_res_id specified.

Properties:

Config: msi_object_id
Env Var: RCLONE_AZUREBLOB_MSI_OBJECT_ID
Type: string
Required: false

--azureblob-msi-client-id

Object ID of the user-assigned MSI to use, if any.

Leave blank if msi_object_id or msi_mi_res_id specified.

Properties:

Config: msi_client_id
Env Var: RCLONE_AZUREBLOB_MSI_CLIENT_ID
Type: string
Required: false

--azureblob-msi-mi-res-id

Azure resource ID of the user-assigned MSI to use, if any.

Leave blank if msi_client_id or msi_object_id specified.

Properties:

Config: msi_mi_res_id
Env Var: RCLONE_AZUREBLOB_MSI_MI_RES_ID
Type: string
Required: false

--azureblob-endpoint

Endpoint for the service.

Leave blank normally.

Properties:

Config: endpoint
Env Var: RCLONE_AZUREBLOB_ENDPOINT
Type: string
Required: false

--azureblob-upload-cutoff

Cutoff for switching to chunked upload (<= 256 MiB) (deprecated).

Properties:

Config: upload_cutoff
Env Var: RCLONE_AZUREBLOB_UPLOAD_CUTOFF
Type: string
Required: false

--azureblob-chunk-size

Upload chunk size.

Note that this is stored in memory and there may be up to "--transfers" * "--azureblob-upload-concurrency" chunks stored at once in memory.

Properties:

Config: chunk_size
Env Var: RCLONE_AZUREBLOB_CHUNK_SIZE
Type: SizeSuffix
Default: 4Mi

--azureblob-upload-concurrency

Concurrency for multipart uploads.

This is the number of chunks of the same file that are uploaded concurrently.

If you are uploading small numbers of large files over high-speed links and these uploads do not fully utilize your bandwidth, then increasing this may help to speed up the transfers.

In tests, upload speed increases almost linearly with upload concurrency. For example to fill a gigabit pipe it may be necessary to raise this to 64. Note that this will use more memory.

Note that chunks are stored in memory and there may be up to "--transfers" * "--azureblob-upload-concurrency" chunks stored at once in memory.

Properties:

Config: upload_concurrency
Env Var: RCLONE_AZUREBLOB_UPLOAD_CONCURRENCY
Type: int
Default: 16

--azureblob-list-chunk

Size of blob list.

This sets the number of blobs requested in each listing chunk. Default is the maximum, 5000. "List blobs" requests are permitted 2 minutes per megabyte to complete. If an operation is taking longer than 2 minutes per megabyte on average, it will time out ( source ). This can be used to limit the number of blobs items to return, to avoid the time out.

Properties:

Config: list_chunk
Env Var: RCLONE_AZUREBLOB_LIST_CHUNK
Type: int
Default: 5000

--azureblob-access-tier

Access tier of blob: hot, cool or archive.

Archived blobs can be restored by setting access tier to hot or cool. Leave blank if you intend to use default access tier, which is set at account level

If there is no "access tier" specified, rclone doesn't apply any tier. rclone performs "Set Tier" operation on blobs while uploading, if objects are not modified, specifying "access tier" to new one will have no effect. If blobs are in "archive tier" at remote, trying to perform data transfer operations from remote will not be allowed. User should first restore by tiering blob to "Hot" or "Cool".

Properties:

Config: access_tier
Env Var: RCLONE_AZUREBLOB_ACCESS_TIER
Type: string
Required: false

--azureblob-archive-tier-delete

Delete archive tier blobs before overwriting.

Archive tier blobs cannot be updated. So without this flag, if you attempt to update an archive tier blob, then rclone will produce the error:

can't update archive tier blob without --azureblob-archive-tier-delete

With this flag set then before rclone attempts to overwrite an archive tier blob, it will delete the existing blob before uploading its replacement. This has the potential for data loss if the upload fails (unlike updating a normal blob) and also may cost more since deleting archive tier blobs early may be chargable.

Properties:

Config: archive_tier_delete
Env Var: RCLONE_AZUREBLOB_ARCHIVE_TIER_DELETE
Type: bool
Default: false

--azureblob-disable-checksum

Don't store MD5 checksum with object metadata.

Normally rclone will calculate the MD5 checksum of the input before uploading it so it can add it to metadata on the object. This is great for data integrity checking but can cause long delays for large files to start uploading.

Properties:

Config: disable_checksum
Env Var: RCLONE_AZUREBLOB_DISABLE_CHECKSUM
Type: bool
Default: false

--azureblob-memory-pool-flush-time

How often internal memory buffer pools will be flushed.

Uploads which requires additional buffers (f.e multipart) will use memory pool for allocations. This option controls how often unused buffers will be removed from the pool.

Properties:

Config: memory_pool_flush_time
Env Var: RCLONE_AZUREBLOB_MEMORY_POOL_FLUSH_TIME
Type: Duration
Default: 1m0s

--azureblob-memory-pool-use-mmap

Whether to use mmap buffers in internal memory pool.

Properties:

Config: memory_pool_use_mmap
Env Var: RCLONE_AZUREBLOB_MEMORY_POOL_USE_MMAP
Type: bool
Default: false

--azureblob-encoding

The encoding for the backend.

See the encoding section in the overview for more info.

Properties:

Config: encoding
Env Var: RCLONE_AZUREBLOB_ENCODING
Type: MultiEncoder
Default: Slash,BackSlash,Del,Ctl,RightPeriod,InvalidUtf8

--azureblob-public-access

Public access level of a container: blob or container.

Properties:

Config: public_access
Env Var: RCLONE_AZUREBLOB_PUBLIC_ACCESS
Type: string
Required: false
Examples:
- ""
  - The container and its blobs can be accessed only with an authorized request.
  - It's a default value.
- "blob"
  - Blob data within this container can be read via anonymous request.
- "container"
  - Allow full public read access for container and blob data.

--azureblob-no-head-object

If set, do not do HEAD before GET when getting objects.

Properties:

Config: no_head_object
Env Var: RCLONE_AZUREBLOB_NO_HEAD_OBJECT
Type: bool
Default: false

Limitations

MD5 sums are only uploaded with chunked files if the source has an MD5 sum. This will always be the case for a local to azure copy.

rclone about is not supported by the Microsoft Azure Blob storage backend. Backends without this capability cannot determine free space for an rclone mount or use policy mfs (most free space) as a member of an rclone union remote.

See List of backends that do not support rclone about and rclone about

Azure Storage Emulator Support

You can test rclone with storage emulator locally, to do this make sure azure storage emulator installed locally and set up a new remote with rclone config follow instructions described in introduction, set use_emulator config as true, you do not need to provide default account name or key if using emulator.

15 KiB Raw Blame History Unescape Escape

{{< icon "fab fa-windows" >}} Microsoft Azure Blob Storage

Configuration

--fast-list

Modified time

Performance

Restricted filename characters

Hashes

Authenticating with Azure Blob Storage

Account and Key

SAS URL

Standard options

--azureblob-account

--azureblob-service-principal-file

--azureblob-key

--azureblob-sas-url

--azureblob-use-msi

--azureblob-use-emulator

Advanced options

--azureblob-msi-object-id

--azureblob-msi-client-id

--azureblob-msi-mi-res-id

--azureblob-endpoint

--azureblob-upload-cutoff

--azureblob-chunk-size

--azureblob-upload-concurrency

--azureblob-list-chunk

--azureblob-access-tier

--azureblob-archive-tier-delete

--azureblob-disable-checksum

--azureblob-memory-pool-flush-time

--azureblob-memory-pool-use-mmap

--azureblob-encoding

--azureblob-public-access

--azureblob-no-head-object

Limitations

Azure Storage Emulator Support

15 KiB

Raw Blame History