This also factors the config questions into a state based mechanism so
a backend can be configured using the same dialog as rclone config but
remotely.
This is a very large change which turns the post Config function in
backends into a state based call and response system so that
alternative user interfaces can be added.
The existing config logic has been converted, but it is quite
complicated and folloup commits will likely be needed to fix it!
Follow up commits will add a command line and API based way of using
this configuration system.
Includes adding support for additional size input suffix Mi and MiB, treated equivalent to M.
Extends binary suffix output with letter i, e.g. Ki and Mi.
Centralizes creation of bit/byte unit strings.
Restructuring of config code in v1.55 resulted in config
file being loaded early at process startup. If configuration
file is encrypted this means user will need to supply the password,
even when running commands that does not use config.
This also lead to an issue where mount with --deamon failed to
decrypt the config file when it had to prompt user for passord.
Fixes#5236Fixes#5228
Use %AppData% as primary default for configuration file on Windows,
which is more in line with Windows standards, while existing default
of using home directory is more Unix standards - though that made rclone
more consistent accross different OS.
Fixes#4667
Before this change any backends which required extra config in the
oauth phase (like the `region` for zoho) didn't work with `rclone
authorize`.
This change serializes the extra config and passes it to `rclone
authorize` and returns new config items to be set from rclone
authorize.
`rclone authorize` will still accept its previous configuration
parameters for use with old rclones.
Fixes#5178
Before this change, a sync which was finished with a graceful transfer
cutoff could return "context canceled" instead of the correct error.
This fixes the problem by ignoring "context canceled" errors if we
have done a graceful stop.
Before this change, on the first attempt to create a backend we used a
non-canonicalized string. When the backend expired the second attempt
to create it would use the canonicalized string (because it was in the
remap cache) which would fail because it was now `name{XXXX}:`
This change makes sure that whenever we create a backend we always use
the non-canonicalized string.
See: https://forum.rclone.org/t/connection-string-inconsistencies-on-beta/23171
This commit makes the previously statically configured fs cache configurable.
It introduces two parameters `--fs-cache-expire-duration` and
`--fs-cache-expire-interval` to control the caching of the items.
It also adds new interfaces to lib/cache to set these.
Before this change when the context was cancelled (due to
--max-duration for example) this could deadlock when uploading
multipart uploads.
This change fixes the problem by introducing another go routine to
monitor the context and close the pipe with an error when the context
errors.
In this commit
8a46dd1b57 fspath: Implement a connection string parser #4996
The parsing code was re-written. This didn't quite work as before,
failing to adjust local paths on Windows when it should.
This patch fixes the problem and implements tests for it.
This patch modifies the output of `rclone version`.
The `os/arch` line is split into `os/type` and `os/arch`.
The `go version` line is now tagged as `go/version` for consistency.
Additionally the `go/linking` line tells whether the rclone
was linked as a static or dynamic executable.
The new `go/tags` line shows a space separated list of build tags.
The info about linking and build tags is also added to the output
of the `core/version` RC endpoint.
This patch adds the missing stats to the output of core/stats
- totalChecks
- totalTransfers
- totalBytes
- eta
This now includes enough information to rebuild the normal stats
output from rclone including percentage completions and ETAs.
Fixes#5116
Users have noticed that backends created via the rc have been failing
to refresh their tokens with this error:
Token refresh failed try 1/5: context canceled
This is because the rc server cancels the context used to make the
backend when the request has finished. This same context is used to
refresh the token and the oauth library checks to see if the context
has been cancelled.
This patch creates a new context for the cached backends and copies
the global and filter config into the new context.
See: https://forum.rclone.org/t/google-drive-token-refresh-failed/22283
Backends for which additional config is detected (in the config string
or on the command line or as environment variables) will gain a suffix
`{XXXXX}` where `XXXX` is a base64 encoded md5hash of the config
string.
This fixes backend caching with config string remotes.
This much requested feature now works properly:
rclone copy -vv drive,shared_with_me:file.txt drive:
This adds AddOverrideGetter and GetOverride methods to config map and
uses them in fs.ConfigMap.
This enables us to tell which values have been set and which are just
read from the config file or at their defaults.
This also deletes the unused AddGetters method in configmap.
This is implemented as a state machine parser so it can emit sensible
error messages.
It does not use the connection strings elsewhere in rclone yet - see
subsequent commits.
An optional fuzzer is implemented for the Parse function.
Before this change if a config was altered via the rc then when a new
backend was created from that config, if there was a backend already
running from the old config in the cache then it would be used instead
of creating a new backend with the new config, thus leading to
confusion.
This change flushes the fs cache of any backends based off a config
when that config is changed is over the rc.
Before this change the config file needed to be explicitly reloaded.
This coupled the config file implementation with the backends
needlessly.
This change stats the config file to see if it needs to be reloaded on
every config file operation.
This allows us to remove calls to
- config.SaveConfig
- config.GetFresh
Which now makes the the only needed interface to the config file be
that provided by configmap.Map when rclone is not being configured.
This also adds tests for configfile
This change checks the context whenever rclone might retry, and
doesn't retry if the current context has an error.
This fixes the pathological behaviour of `--max-duration` refusing to
exit because all the context deadline exceeded errors were being
retried.
This unfortunately meant changing the shouldRetry logic in every
backend and doing a lot of context propagation.
See: https://forum.rclone.org/t/add-flag-to-exit-immediately-when-max-duration-reached/22723
This change makes dedupe recursively count elements in same-named directories
and make the largest one primary. This allows to minimize the amount of data
moved (or at least the amount of API calls) when dedupe merges them.
It also adds a new fs.Object interface `ParentIDer` with function `ParentID` and
implements it for the drive and opendrive backends. This function returns
parent directory ID for objects on filesystems that allow same-named dirs.
We use it to correctly count sizes of same-named directories.
Fixes#2568
Co-authored-by: Ivan Andreev <ivandeex@gmail.com>
This splits config.go into ui.go for the user interface functions and
authorize.go for the implementation of `rclone authorize`.
It also moves the tests into the correct places (including one from
obscure which was in the wrong place).
If you are using rclone a library you can decide to use the rclone
config file system or not by calling
configfile.LoadConfig(ctx)
If you don't you will need to set `config.Data` to an implementation
of `config.Storage`.
Other changes
- change interface of config.FileGet to remove unused default
- remove MustValue from config.Storage interface
- change GetValue to return string or bool like elsewhere in rclone
- implement a default config file system which panics with helpful error
- implement getWithDefault to replace the removed MustValue
- don't embed goconfig.ConfigFile so we can change the methods
Before this change the core bandwidth limit was limited to upload or
download value if the other value was off.
This fix only applies a core bandwidth limit when both values are set.
Reapply missing bwlimiting which was inserted in
0a932dc1f2 Add --bwlimit for upload and download #1873
But accidentally removed when merging
edfe183ba2 fshttp: add DSCP support with --dscp for QoS with differentiated services
Rclone uses directory exclusions to cut down the listing it has to do,
so before this fix `--exclude dir/` would make sure nothing in `dir/`
was scanned, **except** if --fast-list was used, in which case only
the directory was excluded and everything within it was included.
This is rather unexpected, so this patch makes `--exclude dir/` be
equivalent to `--exclude dir/**`, meaning that excluding a directory
excludes it and its contents.
We can't do the same for --include without changing the semantics of
filtering slightly.
Fixes#3375
Before this change options were read and set in native format. This
means for example nanoseconds for durations or an integer for
enumerated types, which isn't very convenient for humans.
This change enables these types to be set with a string with the
syntax as used in the command line instead, so `"10s"` rather than
`10000000000` or `"DEBUG"` rather than `8` for log level.
This change decreases the edge limiter burst size which dramatically
increases the smoothness of the bandwidth limiting.
The core bandwidth limiter remains with a large burst so it isn't
affected by double rate limiting on the edge limiters.
See: #4395
See: https://forum.rclone.org/t/bwlimit-is-not-really-smooth/20947
This change uses the bwlimit code to apply limits to the receive and
transmit data functions in the HTTP Transport.
This means that all HTTP transactions will have limiting applied -
this includes listings for example.
For HTTP based transorts this makes the limiting in Accounting
redundant and possibly counter productive
TestParseDuration relied on an elapsed time calculation which
would vary based on the system local time. Fix the test by not relying
on the system time location. Also make the test more deterministic
by injecting time in tests rather than using system time.
Fixes#4529.
Before this change attempting to return an error from core/command
failed with a 500 error and a message about unmarshable types.
This is because it was attempting to marshal the input parameters
which get _response added to them which contains an unmarshalable
field.
This was fixed by using the original parameters in the error response
rather than the one modified during the error handling.
This also adds end to end tests for the streaming facilities as used
in core/command.
Before this change calling core/command gave the error
error: response object is required expecting *http.ResponseWriter value for key "_response" (was *http.response)
This was because the http.ResponseWriter is an interface not an object.
Removing the `*` fixes the problem.
This also indicates that this bit of code wasn't properly tested.
The message now includes the flag name to help the user work out what
is happening.
Invalid value for environment variable "RCLONE_VERSION" when setting default
for --version: strconv.ParseBool: parsing "yes": invalid syntax
This commit modifies the operations.hashSum function by adding an alternate code path. This code path is triggered by passing downloadFlag = True. When activated, rclone will download files from the remote and hash them locally. downloadFlag = False preserves the existing behavior of using the remote to retrieve the hash.
This commit modifies HashLister to support the new hashSum method as well as consolidating the roles of HashLister, HashListerBase64, Md5sum, and Sha1sum. The printing of hashes from the function defined in HashLister has been revised to work with --progress. There are light changes to operations.syncFprintf and cmd.startProgress for this.
The unit test operations_test.TestHashSums is modified to support this change and test the download functionality.
The command functions hashsum, md5sum, sha1sum, and dbhashsum are modified to support this change. A download flag has been added and an output-file flag has been added. The output-file flag writes hashes to a file instead of stdout to avoid the need to redirect stdout.
Before this fix setting an alias of `s3:bucket` then using `alias:..`
would use the current working directory!
This fix corrects the path parsing. This parsing is also used in
wrapping backends like crypt, chunker, union etc.
It does not allow looking above the root of the alias, so `alias:..`
now lists `s3:bucket` as you might expect if you did `cd /` then
`ls ..`.
Before this change rclone would upload the whole of multipart files
before receiving a message from dropbox that the path was too long.
This change hard codes the 255 rune limit and checks that before
uploading any files.
Fixes#4805
This is done by making fs.Config private and attaching it to the
context instead.
The Config should be obtained with fs.GetConfig and fs.AddConfig
should be used to get a new mutable config that can be changed.
This adds a context.Context parameter to NewFs and related calls.
This is necessary as part of reading config from the context -
backends need to be able to read the global config.
Fix the copy and move operations that broke in 127f0fc when copying directly
to a remote without a specific destination.
Signed-off-by: Anagh Kumar Baranwal <6824881+darthShadow@users.noreply.github.com>
Before this change we counted the final summary error as an error,
producing confusing log messages like:
Failed to check with 54 errors: last error was: 53 differences found
This change marks the summary error as already being counted, so the
error message becomes:
Failed to check with 53 errors: last error was: 53 differences found
This change also returns a listing failure in preference to a summary error.
See: https://forum.rclone.org/t/slow-checksum-validation/19763/22
Before this change
RCLONE_DRIVE_CHUNK_SIZE=111M rclone help flags | grep drive-chunk-size
Would show the default value, not the setting of RCLONE_DRIVE_CHUNK_SIZE
as the non backend flags do.
This change makes it work as expected by setting the default of the
option to the environment variable.
Fixes#4659
Adds a flag, --progress-terminal-title, that when used with --progress,
will print the string `ETA: %s` to the terminal title.
This also adds WriteTerminalTitle to lib/terminal
Before this change rclone would emit the message
--checksum is in use but the source and destination have no hashes in common; falling back to --size-only
When the source or destination hash was missing as well as when the
source and destination had no hashes in common.
This first case is very confusing for users when the source and
destination do have a hash in common.
This change fixes that and makes sure the error message is not emitted
on missing hashes even when there is a hash in common.
See: https://forum.rclone.org/t/source-and-destination-have-no-hashes-in-common-for-unencrypted-drive-to-local-sync/19531
Before this change we sorted transfers in the stats list solely on
time started. However if --check-first was in use then lots of
transfers could be started in the same millisecond. Because Windows
time resolution is only 1mS this caused the entries to sort equal and
bounce around in the list.
This change fixes the sort so that if the time is equal it uses the
name which should stabilize the order.
Fixes#4599
Before this change the code which summed up the existing transfers
over all the stats groups forgot to add the old transfer time and old
transfers in.
This meant that the speed and elapsedTime got increasingly inaccurate
over time due to the transfers being culled from the list but their
time not being accounted for.
This change adds the old transfers into the sum which fixes the
problem.
This was only a problem over the rc.
Fixes#4569
Before ths fix --cutoff-mode soft and cautious would emit a Fatal
error which stopped the sync immediately.
This fix introduces a new error which is checked in the sync error
processing which stops the sync gracefully.
Fixes#4576
This patch provides the support of synchronous cache space recovery
to allow read threads to recover from ENOSPC errors when cache space
can be recovered from cache items that are not in use or safe to be
reset/emptied .
The patch complements the existing cache cleaning process in two ways.
Firstly, the existing cache cleaning process is time-driven that runs
periodically. The cache space can run out while the cache cleaner
thread is still waiting for its next scheduled run. The io threads
encountering ENOSPC return an internal error to the applications
in this case even when cache space can be recovered to avoid this
error. This patch addresses this problem by having the read threads
kick the cache cleaner thread in this condition to recover cache
space preventing unnecessary ENOSPC errors from being seen by the
applications.
Secondly, this patch enhances the cache cleaner to support cache
item reset. Currently the cache purge process removes cache
items that are not in use. This may not be sufficient when the
total size of the working set exceeds the cache directory's
capacity. Like in the current code, this patch starts the purge
process by removing cache files that are not in use. Cache items
whose access times are older than vfs-cache-max-age are removed first.
After that, other not-in-use items are removed in LRU order until
vfs-cache-max-size is reached. If the vfs-cache-max-size (the quota)
is still not reached at this time, this patch adds a cache reset
step to reset/empty cache files that are still in use but not
dirtied. This enables application processes to continue without
seeing an error even when the working set depletes the cache space
as long as there is not a large write working set hoarding the
entire cache space.
By design this patch does not add ENOSPC error recovery for write
IOs. Rclone does not empty a write cache item until the file data
is written back to the backend upon close. Allowing more cache
space to be consumed by dirty cache items when the cache space is
already running low would increase the risk of exhausting the cache
space in a way that the vfs mount becomes unreadable.
The deadlock was caused in transfermap.go by calling mu.RLock() in one
function then calling it again in a sub function. Normally this is
fine, however this leaves a window where mu.Lock() can be called. When
mu.Lock() is called it doesn't allow the second mu.RLock() and
deadlocks.
Thead 1 Thread 2
String():mu.RLock()
del():mu.Lock()
sortedSlice():mu.RLock() - DEADLOCK
Lesson learnt: don't try using locks recursively ever!
This patch fixes the problem by removing the second mu.RLock(). This
was done by factoring the code that was calling it into the
transfermap.go file so all the locking can be seen at once which was
ultimately the cause of the problem - the code which used the locks
was too far away from the rest of the code using the lock.
This problem was introduced in:
bfa5715017 fs/accounting: sort transfers by start time
Which hasn't been released in a stable version yet
- add a directory to the optional Purge interface
- fix up all the backends
- add an additional integration test to test for the feature
- use the new feature in operations.Purge
Many of the backends had been prepared in advance for this so the
change was trivial for them.
This is preparation for getting the Accounting to check the context,
buf first we need to get it in place. Since this is one of those
changes that makes lots of noise, this is in a seperate commit.
go1.15 introduced a stricter policy for what you can convert with
`string()` and now `go vet` warns if you try to do `string(int)`.
See: https://github.com/golang/go/issues/32479
If the parameter being passed is an object then it can be passed as a
JSON string rather than using the `--json` flag which simplifies the
command line.
rclone rc operations/list fs=/tmp remote=test opt='{"showHash": true}'
Rather than
rclone rc operations/list --json '{"fs": "/tmp", "remote": "test", "opt": {"showHash": true}}'
Before this change, if the cache was given a source `remote:file` it
stored `remote:` with the error `fs.ErrorIsFile` attached. This meant
that if it `remote:` was subsequently looked up it would return the
`fs.ErrorIsFile` error.
This broke `moveto remote:file remote:file2` as moveto would lookup
`remote:` from the second argument and erroneously get the
`fs.ErrorIsFile` error.
This likely broke other commands too.
This was broken in
4c9836035 fs/cache: Add Pin and Unpin and canonicalised lookup
Which was released in v1.52.0
The fix is to make a new cache entry for `remote:` with no error
attached in the case that the original call returned `fs.ErrorIsFile`.
This adds the missing WSAECONNREFUSED error to the list of errors we
can retry under Windows.
> Connection refused. No connection could be made because the target
> computer actively refused it.
It also adds any relevant errors I could see in the error code list.
See: https://forum.rclone.org/t/failing-to-upload-large-file-to-b2/17085
This was caused by using the stats group from the context passed in by the rcd
rather than the global stats group.
Signed-off-by: Gary Kim <gary@garykim.dev>
Before this change `--track-renames-strategy` was broken. The hashing
method it used could declare times that were very close together to be
different.
The time hash was discarded and instead we check the modification time
window on every hash match.
Provided that the user doesn't use `--track-renames-strategy` on a
huge number of identically sized files this will perform just fine.
See: https://forum.rclone.org/t/track-renames-strategy-modtime-doesnt-work/16992/5
This adds expire and unlink fields to the PublicLink interface.
This fixes up the affected backends and removes unlink parameters
where they are present.
Before this change you could use "" as a valid remote, so `rclone lsf
""` would work. This was treated as the current directory.
This is unexpected and creates a footgun for scripting when an empty
variable is passed to rclone by accident.
This fix returns the error "can't use empty string as a path" instead
of allowing it.
Before this change there was some ambiguity about whether passwords
were obscured on not passing them into config create or config update.
This change adds the --obscure and --no-obscure flags to make the
intent clear.
It also updates the remote control and the tests.
Fixes#3728
If your filenames contain two near-identical Unicode characters,
rclone will normalize these, making them identical. This flag
gives you the ability to keep them unique. This might
create unintended side effects, such as duplicating files that
contain certain Unicode characters, when downloading them from
certain cloud providers to a macOS filesystem.
Fixes#4228
During a copy/sync command, if an operation fails due to a network
issue and is retried, the underlying io.Reader is re-initialised,
but the stats for bytes already read are not reset, leading to incorrect
stats. THis was fixed by resetting the bytes read when an Account is
re-initialized.
This includes a new directory listing template which was originally
from the Caddy project (used with permission and copyright attribution).
This is used whenever we serve directory listings so `rclone serve
http`, `rclone serve webdav` and `rclone rcd --rc-serve`
This also modifies the tests so they work with the original template which
is easier to debug.
Bind rclone standard input to password command's standard input. This
allows to provide password from a pipe and collect it using cat.
The typical use case is when rclone is on a remote server with an
encrypted configuration. This solved the environment variable
issue (#3368) and the password storage on remote host.
Now the following chain is allowed:
echo 'secret' | ssh host.example.com \
sudo -u rclone \
rclone --config /path/to/rclone.conf \
--password-command 'cat' ls remote:
Signed-off-by: Sébastien Gross <seb•ɑƬ•chezwam•ɖɵʈ•org>
Co-authored-by: Sébastien Gross <seb•ɑƬ•chezwam•ɖɵʈ•org>
if running `rclone rcd --rc-user=admin --rc-pass=admin
--rc-allow-origin="*"`, lots of duplicate warnings apperent in log
Warning: Allow origin set to *. This can cause serious security problems.
Warning: Allow origin set to *. This can cause serious security problems.
....
This is not conducive to analyzing debugging info.
Therefore, let's show it only once.
Before this change we stored cached Fs under the config string the
user gave us. As the result of fs.ConfigString() can often be
different after the backend has canonicalised the paths this meant
that we could not look up backends in the cache reliably.
After this change we store cached Fs under their config string as
returned from fs.ConfigString(f) after the Fs has been created. We
also store a map of user to canonical names (where they are different)
so the users can look up Fs under the names they passed to rclone too.
This change along with Pin and Unpin is necessary so we can look up
the Fs in use reliably in the `backend/command` remote control
interface.
Nick Craig-Wood
albertony
Chris Macklin
Nolan Woods
Nick Gaya
Ivan Andreev
Saksham Khanna
Fionera
K265
Ankur Gupta
Max Sum
negative0
Zach Kipp
Aleksandar Jankovic
Ingo Weiss
Benjamin Gustin
lostheli
Nathan Collins
zhucan
Maciej Zimnoch
Ankur Gupta
buengese
Anagh Kumar Baranwal
Adam Plánský
Josh Soref
LaSombra
Hekmon
Aaron Gokaslan
Leo Luan
jtagcat
jtagcat
Gary Kim
fishbullet
Roman Kredentser
Martin Michlmayr
Ben Zenker
calisro
Sébastien Gross
ElonH