Backport #25476 by @GeorgDangl
In the process of doing a bit of automation via the API, we've
discovered a _small_ issue in the Swagger definition. We tried to create
a push mirror for a repository, but our generated client raised an
exception due to an unexpected status code.
When looking at this function:
3c7f5ed7b5/routers/api/v1/repo/mirror.go (L236-L240)
We see it defines `201 - Created` as response:
3c7f5ed7b5/routers/api/v1/repo/mirror.go (L260-L262)
But it actually returns `200 - OK`:
3c7f5ed7b5/routers/api/v1/repo/mirror.go (L373)
So I've just updated the Swagger definitions to match the code😀
Co-authored-by: Georg Dangl <10274404+GeorgDangl@users.noreply.github.com>
Backport #25548 by @Zettat123
This PR
- fixes#25545
- fixes two incorrect `reqToken()` in `/notifications` endpoints (caused
by #24767)
Co-authored-by: Zettat123 <zettat123@gmail.com>
Backport #25537
More fix for #24981
* #24981Close#22361, #25552
* #22361
* #25552
There were many patches for Gitea's sub-commands to satisfy the facts:
* Some sub-commands shouldn't output any log, otherwise the git protocol
would be broken
* Sometimes the users want to see "verbose" or "quiet" outputs
That's a longstanding problem, and very fragile. This PR is only a quick
patch for the problem.
In the future, the sub-command system should be refactored to a clear
solution.
----
Other changes:
* Use `ReplaceAllWriters` to replace
`RemoveAllWriters().AddWriters(writer)`, then it's an atomic operation.
* Remove unnecessary `syncLevelInternal` calls, because
`AddWriters/addWritersInternal` already calls it.
Backport #25531 by @HesterG
Right now rerun icon on action view component will not be seen when
duration text length is long, because the wrapper `job-brief-info` has a
fixed width, and the svg is squeezed. The way to fix this in this PR is
to change width to `fit-content` and exchange position of duration text
and rerun svg.
Before (rerun svg not shown on hover):
<img width="1401" alt="Screen Shot 2023-06-27 at 12 53 41"
src="https://github.com/go-gitea/gitea/assets/17645053/bb3f62ec-8c56-4dbc-96f1-718b50426d91">
After:
<img width="1409" alt="Screen Shot 2023-06-27 at 12 50 59"
src="https://github.com/go-gitea/gitea/assets/17645053/620aa02c-2326-408d-a763-453f48f42c40">
Co-authored-by: HesterG <hestergong@gmail.com>
Backport #25501 by @wxiaoguang
A regression of #25330 : The nil "Action" should be treated as "help"
In old releases: `./gitea admin` show helps
After #25330: `./gitea admin` panics (although the code returned `nil`
if action is nil, but Golang's quirk is: nil in interface is not nil)
With this PR: `./gitea admin` shows helps as the old releases.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Backport #25480 by @wxiaoguang
Fix#25481
The `InitWorkPathAndCommonConfig` calls `LoadCommonSettings` which does
many checks like "current user is root or not".
Some commands like "environment-to-ini" shouldn't do such check, because
it might be run with "root" user at the moment (eg: the docker's setup
script)
ps: in the future, the docker's setup script should be improved to avoid
Gitea's command running with "root"
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Backport #25446 by @wxiaoguang
Fix #25438
All non-"ok" buttons which do not have "type" should not submit the
form, should not be triggered by "Enter".
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Backport #25330
# The problem
There were many "path tricks":
* By default, Gitea uses its program directory as its work path
* Gitea tries to use the "work path" to guess its "custom path" and
"custom conf (app.ini)"
* Users might want to use other directories as work path
* The non-default work path should be passed to Gitea by GITEA_WORK_DIR
or "--work-path"
* But some Gitea processes are started without these values
* The "serv" process started by OpenSSH server
* The CLI sub-commands started by site admin
* The paths are guessed by SetCustomPathAndConf again and again
* The default values of "work path / custom path / custom conf" can be
changed when compiling
# The solution
* Use `InitWorkPathAndCommonConfig` to handle these path tricks, and use
test code to cover its behaviors.
* When Gitea's web server runs, write the WORK_PATH to "app.ini", this
value must be the most correct one, because if this value is not right,
users would find that the web UI doesn't work and then they should be
able to fix it.
* Then all other sub-commands can use the WORK_PATH in app.ini to
initialize their paths.
* By the way, when Gitea starts for git protocol, it shouldn't output
any log, otherwise the git protocol gets broken and client blocks
forever.
The "work path" priority is: WORK_PATH in app.ini > cmd arg --work-path
> env var GITEA_WORK_DIR > builtin default
The "app.ini" searching order is: cmd arg --config > cmd arg "work path
/ custom path" > env var "work path / custom path" > builtin default
## ⚠️ BREAKING
If your instance's "work path / custom path / custom conf" doesn't meet
the requirements (eg: work path must be absolute), Gitea will report a
fatal error and exit. You need to set these values according to the
error log.
Backport #25395 by @wxiaoguang
That's a longstanding INI package problem: the "MustXxx" calls change
the option values, and the following "Save" will save a lot of garbage
options into the user's config file.
Ideally we should refactor the INI package to a clear solution, but it's
a huge work.
A clear workaround is what this PR does: when "Save", load a clear INI
instance and save it.
Partially fix#25377, the "install" page needs more fine tunes.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Backport #25381 by @techknowlogick
The [docker/build-push-action@v2
action](https://github.com/docker/build-push-action) by default ignores
the checkout created using the actions/checkout@v2 action. When you pass
a git build context to docker build, it wouldn't include the .git
directory.
By passing `context: .` to the build step then it'll use the Actions git
context which includes the git fetch from the earlier step.
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Manual backport of #25266 because of lockfile conflicts.
- Update all JS dependencies
- Enable stylint
[`media-feature-name-value-no-unknown`](https://stylelint.io/user-guide/rules/media-feature-name-value-no-unknown)
- Make use of new features in webpack and text-expander-element
- Tested Swagger and Mermaid
To explain the `text-expander-element` change: Before this version, the
element added a unavoidable space after emoji completion. Now that
https://github.com/github/text-expander-element/pull/36 is in, we gain
control over this space and I opted to remove it for emoji completion
and retain it for `@` mentions.
Co-authored-by: Giteabot <teabot@gitea.io>
Backport #25278 by @Zettat123
Fix#21072
Username Attribute is not a required item when creating an
authentication source. If Username Attribute is empty, the username
value of LDAP user cannot be read, so all users from LDAP will be marked
as inactive by mistake when synchronizing external users.
This PR improves the sync logic, if username is empty, the email address
will be used to find user.
Co-authored-by: Zettat123 <zettat123@gmail.com>
Backport #25358 by @nephatrine
Fix#25357 .
Just a simple fix the result of `${{ gitea.ref_name }}` to show the
shortened name rather than the full ref.
Co-authored-by: Daniel Wolf <1461334+nephatrine@users.noreply.github.com>
The "--config" option is a global option, it shouldn't appear at the
end.
Otherwise it might not be respected in some cases.
Caught by #25330 and use a separate PR to fix it for 1.20
Backport #25342 by @pmig
We created a Gitea application for the [Exoscale
Marketplace](https://www.exoscale.com/marketplace/listing/glasskube-gitea/)
for easier installation on the European cloud provider.
The installation is managed via the [Glasskube Kubernetes
Operator](https://github.com/glasskube/operator).
Signed-off-by: Philip Miglinci <pmig@glasskube.eu>
Co-authored-by: Philip Miglinci <p.miglinci@gmail.com>
Backport #25331 by @wxiaoguang
If the APP_DATA_PATH isn't written into the config when installing, then
its value is uncertain because some Gitea command doesn't run with
correct WorkPath.
This is a quick fix for #25330 and can be backported.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Giteabot
wxiaoguang
6543
HesterG
lonix1
Denys Konovalov
John Olheiser
techknowlogick
sebastian-sauer
silverwind