Jottacloud have several different apis and endpoints using a mix of different
timestamp formats. In existing code the list operation (after the recent liststream
implementation) uses format from golang's time.RFC3339 constant. Uploads (using the
allocate api) uses format from a hard coded constant with value identical to golang's
time.RFC3339. And then we have the classic JFS time format, which is similar to RFC3339
but not identical, using a different constant. Also the naming is a bit confusing,
since the term api is used both as a generic term and also as a reference to the
newer format used in the api subdomain where the allocate endpoint is located.
This commit refactors these things a bit.
Now using the utility function for deduplication that was newly implemented to
fix an issue with server-side copy. This function uses the original, and generic,
"jfs" api (and its "cphash" feature), instead of the newer "allocate" api dedicated
for uploads. Both apis support similar deduplication functionaly that we rely on for
the SetModTime operation. One advantage of using the jfs variant is that the allocate
api is specialized for uploads, an initial request performs modtime-only changes and
deduplication if possible but if not possible it creates an incomplete file revision
and returns a special url to be used with a following request to upload missing content.
In the SetModTime function we only sent the first request, using metadata from existing
remote file but different timestamps, which lead to a modtime-only change. If, for some
reason, this should fail it would leave the incomplete revision behind. Probably not
a problem, but the jfs implementation used with this commit is simpler and
a more "standalone" request which either succeeds or fails without expecting additional
requests.
A strange feature (probably bug) in the api used by the server-side copy implementation
in Jottacloud backend is that if the destination file is in trash, the copy request
succeeds but the destination will still be in trash! When this situation occurs in
rclone, the copy command will fail with "Failed to copy: object not found" because
rclone verifies that the file info in the response from the copy request is valid,
and since it is marked as deleted it is treated as invalid.
This commit works around this problem by looking for this situation in the response
from the copy operation, and send an additional request to a built-in deduplication
endpoint that will restore the file from trash.
Fixes#6112
The existing code in rclone set the value "offline_access+openid",
when encoded in body it will become "offline_access%2Bopenid". I think
this is wrong. Probably an artifact of "double urlencoding" mixup -
either in rclone or in the jottacloud cli tool version it was sniffed
from? It does work, though. The token received will have scopes "email
offline_access" in it, and the same is true if I change to only
sending "offline_access" as scope.
If a proper space delimited list of "offline_access openid"
is used in the request, the response also includes openid scope:
"openid email offline_access". I think this is more correct and this
patch implements this.
See: #6107
Adds a configuration option to the GCS backend to allow skipping the
check if a bucket exists before copying an object to it, much like
f406dbb added for S3.
Before this change the cache backend was passing -1 into
rate.NewLimiter to mean unlimited transactions per second.
In a recent update this immediately returns a rate limit error as
might be expected.
This patch uses rate.Inf as indicated by the docs to signal no limits
are required.
Before this change the 206 responses from putio Range requests were being
returned as errors.
This change checks for 200 and 206 in the GET response now.
Before this fix, rclone retries chunks of multipart uploads. However
if they had been partially received dropbox would reply with an
incorrect_offset error which rclone was ignoring.
This patch parses the new offset from the error response and uses it
to adjust the data that rclone sends so it is the same as what dropbox
is expecting.
See: https://forum.rclone.org/t/dropbox-rate-limiting-for-upload/29779
This commit switches Google Cloud Storage from the drive pacer to the
s3 pacer. The main difference between them is that the s3 pacer does
not limit transactions in the non-error case. This is appropriate for
a cloud storage backend where you pay for each transaction.
Before this fix `NewObject` could return a wrapped `fs.Object(nil)`
which caused a crash. This was caused by `wrapObject` returning a
`nil` `*Object` which was cast into an `fs.Object`.
This changes the interface of `wrapObject` so it returns an
`fs.Object` instead of a `*Object` and an error which must be checked.
This forces the callers to return a `nil` object rather than an
`fs.Object(nil)`.
See: https://forum.rclone.org/t/panic-in-hasher-when-mounting-with-vfs-cache-and-not-synced-data-in-the-cache/29697/11
Having a replace directive in go.mod causes "go get
github.com/rclone/rclone" to fail as it discussed in this Go issue:
https://github.com/golang/go/issues/44840
This is apparently how the Go team want go.mod to work, so this commit
hard forks github.com/jlaffaye/ftp into github.com/rclone/ftp so we
can remove the `replace` directive from the go.mod file.
Fixes#5810
Before this change rclone send pre-1970 timestamps as negative
numbers. pCloud ignores these and sets them as todays date.
This change sends the timestamps as unsigned 64 bit integers (which is
how the binary protocol sends them) and pCloud accepts the (actually
negative) timestamp like this.
Before this change the new multipart upload ETag checking code was
failing in the integration tests with Alibaba OSS.
Apparently Alibaba calculate the ETag in a different way to AWS.
This introduces a new provider quirk with a flag to disable the
checking of the ETag for multipart uploads.
Mulpart Etag checking has been enabled for all providers that we can
test for and work, and left disabled for the others.
Before this rclone ignored the ETag on multipart uploads which missed
an opportunity for a whole file integrity check.
This adds that check which means that we now check even harder that
multipart uploads have arrived properly.
See #5993
Before this change `rclone about swift:container` would show aggregate
info about all the containers, not just the one in use.
This causes a problem if container listing is disabled (for example in
the Blomp service).
This fix makes `rclone about swift:container` show only the info about
the given `container`. If aggregate info about all the containers is
required then use `rclone about swift:`.
See: https://forum.rclone.org/t/rclone-mount-blomp-problem/29151/18
Before this change, rclone supported authorizing for remote systems by
going to a URL and cutting and pasting a token from Google. This is
known as the OAuth out-of-band (oob) flow.
This, while very convenient for users, has been shown to be insecure
and has been deprecated by Google.
https://developers.googleblog.com/2022/02/making-oauth-flows-safer.html#disallowed-oob
> OAuth out-of-band (OOB) is a legacy flow developed to support native
> clients which do not have a redirect URI like web apps to accept the
> credentials after a user approves an OAuth consent request. The OOB
> flow poses a remote phishing risk and clients must migrate to an
> alternative method to protect against this vulnerability. New
> clients will be unable to use this flow starting on Feb 28, 2022.
This change disables that flow, and forces the user to use the
redirect URL flow. (This is the flow used already for local configs.)
In practice this will mean that instead of cutting and pasting a token
for remote config, it will be necessary to run "rclone authorize"
instead. This is how all the other OAuth backends work so it is a well
tested code path.
Fixes#6000
The directory created by `T.TempDir` is automatically removed when the
test and all its subtests complete.
Reference: https://pkg.go.dev/testing#T.TempDir
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Before this change a multipart upload with the --no-head flag returned
the MD5SUM as a base64 string rather than a Hex string as the rest of
rclone was expecting.
Before this change attempting NewObject on a SAS URL's root would
crash the Azure SDK.
This change detects that using the code from this previous fix
f7404f52e7 azureblob: fix crash when listing outside a SAS URL's root - fixes#4851
And returns not object not found instead.
It also prevents things being uploaded to the root of the SAS URL
which also crashes the Azure SDK.
Before this fix if a file was updated, but to the same length and
timestamp then the local backend would return the wrong (cached)
hashes for the object.
This happens regularly on a crypted local disk mount when the VFS
thinks files have been changed but actually their contents are
identical to that written previously. This is because when files are
uploaded their nonce changes so the contents of the file changes but
the timestamp and size remain the same because the file didn't
actually change.
This causes errors like this:
ERROR: file: Failed to copy: corrupted on transfer: md5 crypted
hash differ "X" vs "Y"
This turned out to be because the local backend wasn't clearing its
cache of hashes when the file was updated.
This fix clears the hash cache for Update and Remove.
It also puts a src and destination in the crypt message to make future
debugging easier.
Fixes#4031
Currently the B2 docs don't specify which format the download_url
setting should have, and if you input it wrong, there is nothing
in the verbose logs or anywhere else that can let you know that.
* Wasabi starts to provide AP Northeast 2 (Osaka) endpoint, so add it to the list
* Rename ap-northeast-1 as "AP Northeast 1 (Tokyo)" from "AP Northeast"
Signed-off-by: lindwurm <lindwurm.q@gmail.com>
After speed testing it was discovered that upload speed goes up pretty
much linearly with upload concurrency. This patch changes the default
from 4 to 16 which means that rclone will use 16 * 4M = 64M per
transfer which is OK even for low memory devices.
This adds a note that performance may be increased by increasing
upload concurrency.
See: https://forum.rclone.org/t/performance-of-rclone-vs-azcopy/27437/9
Previously only the fs being checked on gets passed to
GetModifyWindow(). However, in most tests, the test files are
generated in the local fs and transferred to the remote fs. So the
local fs time precision has to be taken into account.
This meant that on Windows the time tests failed because the
local fs has a time precision of 100ns. Checking remote items uploaded
from local fs on Windows also requires a modify window of 100ns.
This is possible now that we no longer support go1.12 and brings
rclone into line with standard practices in the Go world.
This also removes errors.New and errors.Errorf from lib/errors and
prefers the stdlib errors package over lib/errors.
This removes the checks against the provider throughout the code and
puts them into a single setQuirks function for easy maintenance when
adding a new provider.
It also updates the quirks with the results of testing against
backends we have access to.
This also adds a list_url_encode parameter so that quirk can be
manually set.
This implements a quirks system for providers and notes which
providers we have tested to support ListObjectsV2.
For those providers which don't support ListObjectsV2 we use the
original ListObjects call.
The API doesn't seem to accept a value of "0" any more for the root
directory ID, giving the error "Could not decode folder id".
However omitting it seems to work fine.
In this commit, released in 1.56.0 we started reading the size of the
object from the Content-Length header as returned by the GET request
to read the object.
4401d180aa s3: add --s3-no-head-object
However some object storage systems, notably Ceph, don't return a
Content-Length header.
The new code correctly calls the setMetaData function with a nil
pointer to the ContentLength.
However due to this commit from 2014, released in v1.18, the
setMetaData function was not ignoring the size as it should have done.
0da6f24221 s3: use official github.com/aws/aws-sdk-go including multipart upload #101
This commit correctly ignores the content length if not set.
Fixes#5732
Before this change the `shared_credentials_file` config option was
being ignored.
The correct value is passed into the SDK but it only sets the
credentials in the default provider. Unfortunately we wipe the default
provider in order to install our own chain if env_auth is true.
This patch restores the shared credentials file in the session
options, exactly the same as how we restore the profile.
Original fix:
1605f9e14d s3: Fix shared_credentials_file auth
This patch reverts this commit
1605f9e14d s3: Fix shared_credentials_file auth
It unfortunately had the side effect of making the s3 SDK ignore the
config in our custom chain and use the default provider. This means
that advanced auth was being ignored such as --s3-profile with
role_arn.
Fixes#5468Fixes#5762
The API has changed in the directory move call JSON response from
returning a TaskID as a string to returning it as an integer. In other
places it is still returned as a string though.
This patch allows the TaskID to be an integer or a string in the JSON
response and keeps it internally as a string like before.
Before this change the backoff for the error_background error was 6
seconds. This means that if it wasn't resolved in 60 seconds (with the
default 10 low level retries) then an error was reported.
This error was being reported frequently in the integration tests, so
is likely affecting real users too.
This patch changes the backoff into an exponential backoff
1,2,4,8...1024 seconds to make sure we wait long enough for the
background operation to complete.
See #5734
- setup correct path encoding (fixes backend test FsEncoding)
- ignore range option if file is empty (fixes VFS test TestFileReadAtZeroLength)
- cleanup stray files left after failed upload (fixes test FsPutError)
- rebase code on master, adapt backend for rclone context passing
- translate Siad errors to rclone native FS errors in sia errorHandler
- TestSia: return proper backend options from the script
- TestSia: use uptodate AntFarm image, nebulouslabs/siaantfarm is stale
In
05f128868f azureblob: add --azureblob-no-head-object
we incorrectly parsed the size of the object as the Content-Length of
the returned header. This is incorrect in the presense of Range
requests.
This fixes the problem by parsing the Content-Range header if
avaialble to read the correct length from if a Range request was
issued.
See: #5734
This reverts commit
dc06973796 Revert "s3: use rclone's low level retries instead of AWS SDK to fix listing retries"
Which in turn reverted
5470d34740 "backend/s3: use low-level-retries as the number of SDK retries"
So we are back where we started.
It then modifies it to set the AWS SDK to `--low-level-retries`
retries, but set the rclone retries to 2 so that directory listings
can be retried.
Before this change the cleanup routine exited on the first deletion
error.
This change counts any errors on deletion and exits when the iteration
is complete with an error showing the number of deletion failures.
Deletion failures will be logged.
Before this change we uses limit/offset paging for directories in the
main directory listing routine and in the trash cleanup listing.
This switches to the new scheme of limit/marker which is more reliable
on a directory which is continuously changing. It has the disadvantage
that it doesn't tell us the total number of items available, however
that wasn't information rclone uses.
This changes the interface to NewObject so that if NewObject is called
on a directory then it should return fs.ErrorIsDir if possible without
doing any extra work, otherwise fs.ErrorObjectNotFound.
Tested on integration test server with:
go run integration-test.go -tests backend -run TestIntegration/FsMkdir/FsPutFiles/FsNewObjectDir -branch fix-stat -maxtries 1
The egress charges while using a CloudFront CDN url is cheaper when
compared to accessing the file directly from S3. So added a download
URL advanced option, which when set downloads the file using it.
Before this patch the md5all option would skip creating metadata with
hashsum if base filesystem provided md5, in hope to pass it through.
However, if base hash is slow (for example on local fs), chunker passed
slow md5 but never reported this fact in features.
This patch makes chunker snapshot base hashsum in metadata when md5all is
set and base hashsum is slow since chunker was intended to provide only
instant hashsums from the start.
Fixes#5508
Before this change, when uploading to a crypt, the ObjectInfo
accidentally used the encrypted size, not the unencrypted size when
--crypt-no-data-encryption was set.
Fixes#5498
In presence of no_data_encryption the Crypt's Put method used to over-optimize
and returned base object. This patch makes it return Crypt-wrapped object now.
Fixes#5498
I discovered that `rclone` always upload in chunks of 16MiB whenever
uploading a file smaller than `--drive-upload-cutoff`. This is
undesirable since the purpose of the flag `--drive-upload-cutoff` is
to *prevent* chunking below a certain file size.
I realized that it wasn't `rclone` forcing the 16MiB chunks. The
`google-api-go-client` forces a chunk size default of
[`googleapi.DefaultUploadChunkSize`](32bf29c2e1/googleapi/googleapi.go (L55-L57))
bytes for resumable type uploads. This means that all requests that
use `*drive.Service` directly for upload without specifying a
`googleapi.ChunkSize` will be forced to use a *`resumable`*
`uploadType` (rather than `multipart`) for files less than
`googleapi.DefaultUploadChunkSize`. This is also noted directly in the
Drive API client documentation [here](https://pkg.go.dev/google.golang.org/api/drive/v3@v0.44.0#FilesUpdateCall.Media).
This fixes the problem by passing `googleapi.ChunkSize(0)` to
`Media()` method calls, which is the only way to disable chunking
completely. This is mentioned in the API docs
[here](https://pkg.go.dev/google.golang.org/api/googleapi@v0.44.0#ChunkSize).
The other alternative would be to pass
`googleapi.ChunkSize(f.opt.ChunkSize)` -- however, I'm *strongly* in
favor of *not* doing this for performance reasons. By not explicitly
passing a `googleapi.ChunkSize(0)`, we effectively allow
[`PrepareUpload()`](https://pkg.go.dev/google.golang.org/api/internal/gensupport@v0.44.0#PrepareUpload)
to create a
[`NewMediaBuffer`](https://pkg.go.dev/google.golang.org/api/internal/gensupport@v0.44.0#NewMediaBuffer)
that copies the original `io.Reader` passed to `Media()` in order to
check that its size is less than `ChunkSize`, which will unnecessarily
consume time and memory.
`minChunkSize` is also changed to be `googleapi.MinUploadChunkSize`,
as it is something specified we have no control over.
Google Drive API allows for clauses like "modifiedTime > '2012-06-04T12:00:00'"
in the query param, so the filter flags --max-age and --min-age can be applied
directly at the directory listing phase rather than in a filter.
This is extremely helpful when we want to do an incremental backup of a remote
drive with many files but the number of recently changed file is small.
Co-authored-by: fotile96 <fotile96@users.noreply.github.com>
This replaces built-in os.MkdirAll with a patched version that stops the recursion
when reaching the volume part of the path. The original version would continue recursion,
and for extended length paths end up with \\? as the top-level directory, and the error
message would then be something like:
mkdir \\?: The filename, directory name, or volume label syntax is incorrect.
Before this change the union's feature flags were a strict AND of the
underlying remotes. This means that a union of a local disk (which can
Move but not Copy) and a bucket based remote (which can Copy but not
Move) could neither Move nor Copy.
This fix advertises Move in the union if all the remotes can Move or
Copy. It also implements Move as Copy+Delete (like rclone does
normally) if the underlying union does not support Move.
This enables renames to work with unions of local disk and bucket
based remotes expected.
Fixes#5632
This was started in
3626f10f26 pcloud: add sha256 support - fixes#5496
But this support turned out to be incomplete and caused the
integration tests to fail.
After updating rclone's dependencies these tests started failing on
windows/386
- TestInternalDoubleWrittenContentMatches
- TestInternalMaxChunkSizeRespected
The failures look like this. The root cause is unknown. The `Wait(n=1)
would exceed context deadline` errors come from golang.org/x/time/rate
but it isn't clear what is calling them.
2021/08/20 21:57:16 ERROR : worker-0 <one>: object open failed 0: rate: Wait(n=1) would exceed context deadline
[snip ~10 duplicates]
2021/08/20 21:57:56 ERROR : tidwcm1629496636/one: (0/26) error (chunk not found 0) response
2021/08/20 21:58:02 ERROR : worker-0 <one>: object open failed 0: rate: Wait(n=1) would exceed context deadline
--- FAIL: TestInternalDoubleWrittenContentMatches (45.77s)
cache_internal_test.go:310:
Error Trace: cache_internal_test.go:310
Error: Not equal:
expected: "one content updated double"
actual : ""
Diff:
--- Expected
+++ Actual
@@ -1 +1 @@
-one content updated double
+
Test: TestInternalDoubleWrittenContentMatches
2021/08/20 21:58:03 original size: 23592960
2021/08/20 21:58:03 updated size: 12
In this commit the config system was re-arranged
94dbfa4ea fs: change Config callback into state based callback #3455
This passed the password as a temporary config parameter but forgot to
reveal it in the API call.
At some point some google docs files started having sizes returned in
their listing information.
This then caused rclone to treat the docs as files which caused
downloads to fail.
The API docs now state that google docs may have sizes (whereas I'm
pretty sure it didn't earlier).
This fix removes the check for size, so google docs are identified
solely by not having an MD5 checksum.
This change fixes the bug described below:
if a file is removed while the local backend List() runs,
the call will flag an accounting error.
The bug manifests itself if local backend is the Sync target
due to intrinsic concurrency.
The odds to hit this bug depend on --checkers and --transfers.
Chunker over local backend is affected even more because
updating a composite object with a smaller size content
translates into removing chunks on the underlying file system
and involves a number of List() calls.
- Unify all hash names as lowercase alphanumerics without punctuation.
- Legacy names continue to work but disappear from docs, they can be depreciated or dropped later.
- Make rclone hashsum print supported hash list in case of wrong spelling.
- Update documentation.
Fixes#5071Fixes#4841
Before this change, rclone would always check the root to see if it
was an object.
This change doesn't check to see if the root is an object if the path
ends with a /
This avoids a transaction where rclone HEADs the path to see if it
exists.
See #4990
macOS stores files in NFD form and transferring them like this to some
systems causes the Korean language to display incorrectly.
This adds the flag --local-unicode-normalization to optionally
normalize the file names to NFC.
This also removes the (long deprecated) --local-no-unicode-normalization flag
See: https://forum.rclone.org/t/support-for-korean-jaso-conversion/19435
This is a very large change which turns the post Config function in
backends into a state based call and response system so that
alternative user interfaces can be added.
The existing config logic has been converted, but it is quite
complicated and folloup commits will likely be needed to fix it!
Follow up commits will add a command line and API based way of using
this configuration system.
It was discovered on some Android systems, the stat size of a symlink
is different to the size that readlink returns.
This was giving errors like this
transport connection broken: http: ContentLength=30 with Body length 28
There are enough exceptions to the size of readlink being different to
the size of stat that this patch now always does readlink to work out
the size of a symlink.
Since symlinks are relatively uncommon this shouldn't affect
performance too much and will mean that the size is always correct.
This deprecates the --local-zero-size-links flag which is now
effectively always enabled.
See: https://forum.rclone.org/t/problem-with-symlinks-and-links/23840/
Includes adding support for additional size input suffix Mi and MiB, treated equivalent to M.
Extends binary suffix output with letter i, e.g. Ki and Mi.
Centralizes creation of bit/byte unit strings.
v1.4.6 of uplink allows us to do a negative offset from the end of the
file. This removes a round trip when requesting the last N bytes of a
file.
Previous to v1.4.6 of uplink it wasn't possible to do a negative offset
on download. This meant that to fulfill the semantics of http range
headers it was necessary to first fetch the size of the object via a
stat call and compute absolute offset and length.
Restructuring of config code in v1.55 resulted in config
file being loaded early at process startup. If configuration
file is encrypted this means user will need to supply the password,
even when running commands that does not use config.
This also lead to an issue where mount with --deamon failed to
decrypt the config file when it had to prompt user for passord.
Fixes#5236Fixes#5228
Including the bucket name as part of the `fileNamePrefix` passed to
`b2_get_download_authorization` results in a link valid for objects that
have the bucket name as part of the object path; e.g.,
rclone link :b2:some-bucket/some-file
would result in a public link valid for the object
`some-bucket/some-file` in the `some-bucket` bucket (in rclone-remote
parlance, `:b2:some-bucket/some-bucket/some-file`). This will almost
certainly result in a broken link.
The B2 docs don't explicitly specify this behavior, but the example
given for `fileNamePrefix` provides some clarification.
See https://www.backblaze.com/b2/docs/b2_get_download_authorization.html.
This code removes the code added in
15d19131bd s3: use aws web identity role provider
This code no longer works because it doesn't initialise the
tokenFetcher - leading to a nil pointer crash.
The proper way to initialise this is with the
NewWebIdentityCredentials but it isn't clear where to get the other
parameters: roleARN, roleSessionName, path.
In the linked issue a user reports rclone working with EKS anyway, so
perhaps this code is no longer needed.
If it is needed, hopefully someone who knows AWS better will come
along and fix it!
See: https://forum.rclone.org/t/add-support-for-aws-sso/23569
Betweeen rclone v1.54 and v1.55 there was an approx 3x performance
regression when transferring to distant SFTP servers (in particular
rsync.net).
This turned out to be due to the library github.com/pkg/sftp rclone
uses. Concurrent writes used to be enabled in this library by default
(for v1.12.0 as used in rclone v1.54) but they are no longer enabled
(for v1.13.0 as used in rclone v1.55) for safety reasons and it is
necessary to enable them specifically.
The safety concerns are due to the uncertainty as to whether writes
come in order and whether a half completed file might have holes in
it. This isn't a problem for rclone since a) it doesn't restart
uploads and b) it has a post-transfer checksum test.
This change introduces a new flag `--sftp-disable-concurrent-writes`
to control the feature which defaults to false, meaning that
concurrent writes are enabled as in v1.54.
However this isn't quite enough to fix the problem as the sftp library
needs to be able to sniff the size of the stream from the reader
passed in, so this also adds a `Size` interface to the reader to
enable this. This involved a patch to the library.
The library was reverted to v1.12.0 for v1.55.1 - this patch installs
v1.13.0+master to fix the Size interface problem.
See: https://github.com/pkg/sftp/issues/426
Before this change, rclone checked to see if an object existed before
doing an upload by listing the destination directory. This was very
inefficient, especially with large directories.
After this change rclone uses the pre upload check API call which
checks to see if it is OK to upload an object, and also returns the ID
of an existing object which saves rclone having to do a directory
listing.
OneDrive randomly returns the error message: "InvalidAuthenticationToken: Unable to initialize RPS". These unexpected errors typically caused the entire rclone command to fail.
This work around recognizes these errors and marks them for a low level retry, that mostly succeeds. This will make rclone commands complete without being noticeable affected.
Fixes: #5270
With the file version format standardized in lib/version, `crypt` can
now treat the version strings separately from the encrypted/decrypted
file names. This allows --b2-versions to work with `crypt`.
Fixes#1627
Co-authored-by: Luc Ritchie <luc.ritchie@gmail.com>
Before this change rclone would auth over https even when the server
was configured with http.
Authing over http obviously isn't ideal, however this type of server
is on-premise and doesn't work over https.
PR #4266 modified ftpConnection to make ftp library into using
a custom dial function which is QoS aware and takes care of TLS.
However the ServerConn.Login function from the ftp library also needs
TLS config passed explicitly as a trigger for sending PSBZ and PROT
options to FTP server. This was not taken care of resulting in
failure to connect via FTP with implicit TLS.
This PR fixes that.
Fixes#5210
In
a3fcadddc8 sftp: close idle connections after --sftp-idle-timeout (1m by default)
Idle SFTP connections were closed after 1 minute. However due to the
way SSH multiplexes connections over a single SSH connection this
meant that if uploads or downloads went on for more than one minute
they failed with "EOF errors" as their underlying connection was
closed.
This fixes the problem by not clearing idle connections if there are
any transfers in progress.
Fixes#5197
This reverts the library update done in this commit.
713f8f357d sftp: fix "file not found" errors for read once servers
Reverting this commit triples the performance to a far away sftp server.
See: https://github.com/pkg/sftp/issues/426
Before this change when the context was cancelled (due to
--max-duration for example) this could deadlock when uploading
multipart uploads.
This change fixes the problem by introducing another go routine to
monitor the context and close the pipe with an error when the context
errors.
When reading files from B2 via cloudflare using --b2-download-url
cloudflare strips the Content-Length headers (presumably so it can
inject stuff into the body).
This caused rclone to think the file was corrupted as the length
didn't match.
The patch uses the old length read from the listing if there is no
Content-Length.
See: https://forum.rclone.org/t/b2-cloudflare-error-directory-not-found/23026
This commit broke the initialisation of the union backend
f17d7c0012 union: refactor to use fspath.SplitFs instead of fs.ParseRemote #4996
This patch fixes it.
Box recently changed their API, changing the case of returned API items
> On May 10th, 2021, as part of our continued infrastructure upgrade,
> Box's API response headers will standardize to return in a case
> insensitive manner, in line with industry best practices and our API
> documentation. Applications that are using these headers, such as
> "location" and "retry-after", will need to verify that their
> applications are checking for these headers in a case-insensitive
> fashion.
Rclone was reading the raw headers from the `http.Header` and not
using the `Get` accessor method which meant that it was sensitive to
case changes.
This fixes the problem by using the `Get` accessor method.
See: https://forum.rclone.org/t/box-backend-incompatible-with-box-api-changes-being-deployed/22972
If you exceed rate limits, dropbox tells you to wait for 300 seconds -
this is rather a long time for the user to be waiting for rclone to
finish, so emit a NOTICE level log instead of a DEBUG.
Some sftp servers don't allow the user to access the file after upload.
In this case the error message indicates that using
--sftp-set-modtime=false would fix the problem. However it doesn't
because SetModTime does a stat call which can't be disabled.
Update SetModTime failed: SetModTime stat failed: object not found
After upload this patch checks for an `object not found` error if
set_modtime == false and ignores it, returning the expected size of
the object instead.
It also makes SetModTime do nothing if set_modtime = false
https://forum.rclone.org/t/sftp-update-setmodtime-failed/22873
These were added by accident in
d9959b0271 drive: pass context on to drive SDK - this will help with cancellation
Which added lots of new Context() calls but duplicated some existing
ones.
Before this we just failed if the ftp connection or login failed.
This change adds a pacer just for the ftp connect and retries if the
connection failed to Dial or the login returns a 421 error.
This is implemented as a state machine parser so it can emit sensible
error messages.
It does not use the connection strings elsewhere in rclone yet - see
subsequent commits.
An optional fuzzer is implemented for the Parse function.
Before this change, when using an all create method with one of the
upstreams being read only, if there was an existing file on the read
only remote, it was impossible to update it.
This change detects that situation and creates the file on a
read/write upstream. This file will shadow the file on the read/only
upstream. If it is deleted the read only upstream file will be visible
again.
Fixes#4929
Before this fix using the epff policy could double close a channel.
The fix refactors the code to make that impossible and cancels any
running queries when the first query is found.
Before this change the config file needed to be explicitly reloaded.
This coupled the config file implementation with the backends
needlessly.
This change stats the config file to see if it needs to be reloaded on
every config file operation.
This allows us to remove calls to
- config.SaveConfig
- config.GetFresh
Which now makes the the only needed interface to the config file be
that provided by configmap.Map when rclone is not being configured.
This also adds tests for configfile
It introduces a new flag --sftp-disable-concurrent-reads to stop the
problematic behaviour in the SFTP library for read-once servers.
This upgrades the sftp library to v1.13.0 which has the fix.
This change checks the context whenever rclone might retry, and
doesn't retry if the current context has an error.
This fixes the pathological behaviour of `--max-duration` refusing to
exit because all the context deadline exceeded errors were being
retried.
This unfortunately meant changing the shouldRetry logic in every
backend and doing a lot of context propagation.
See: https://forum.rclone.org/t/add-flag-to-exit-immediately-when-max-duration-reached/22723
This change makes dedupe recursively count elements in same-named directories
and make the largest one primary. This allows to minimize the amount of data
moved (or at least the amount of API calls) when dedupe merges them.
It also adds a new fs.Object interface `ParentIDer` with function `ParentID` and
implements it for the drive and opendrive backends. This function returns
parent directory ID for objects on filesystems that allow same-named dirs.
We use it to correctly count sizes of same-named directories.
Fixes#2568
Co-authored-by: Ivan Andreev <ivandeex@gmail.com>
If you are using rclone a library you can decide to use the rclone
config file system or not by calling
configfile.LoadConfig(ctx)
If you don't you will need to set `config.Data` to an implementation
of `config.Storage`.
Other changes
- change interface of config.FileGet to remove unused default
- remove MustValue from config.Storage interface
- change GetValue to return string or bool like elsewhere in rclone
- implement a default config file system which panics with helpful error
- implement getWithDefault to replace the removed MustValue
- don't embed goconfig.ConfigFile so we can change the methods
This fixes the polling implementation for Dropbox, particularly
when using a scoped app. This also adds a lower end check for the
timeout, as I forgot to include that in the original implementation.
In this commit
fc5b14b620 s3: Added `--s3-disable-http2` to disable http/2
We created our own transport so we could disable http/2. However the
added function is called twice meaning that we create two HTTP
transports. This didn't happen with the original code because the
default transport is cached by fshttp.
Rclone normally does a PUT followed by a HEAD request to check an
upload has been successful.
With the two transports, the PUT and the HEAD were being done on
different HTTP transports. This means that it wasn't re-using the same
HTTP connection, so the HEAD request showed the previous object value.
This caused rclone to declare the upload was corrupted, delete the
object and try again.
This patch makes sure we only create one transport and use it for both
PUT and HEAD requests which fixes the problem with Wasabi.
See: https://forum.rclone.org/t/each-time-rclone-is-run-1-3-fails-2-3-succeeds/22545
Some storage providers e.g. S3 don't have an efficient rename operation.
Before this change, when chunker finished an upload, the server-side copy
and delete operations that renamed temporary chunks to their final names
could take a significant amount of time.
This PR records transaction identifier (versioning) in the metadata of
chunker composite objects striving to remove the need for rename
operations on such backends.
This approach will be triggered be the new "transactions" configuration
option, which can be "rename" (the default) or "norename".
We implement the new approach for uploads (Put operations).
The chunker Move operation still uses the rename operation of
underlying backend. Filling this gap is left for a later PR.
Co-authored-by: Ivan Andreev <ivandeex@gmail.com>
Before this change, if folder level access permissions policy was in
use, with trailing `/` marking the folders then rclone would HEAD the
path without a trailing `/` to work out if it was a file or a folder.
This returned a permission denied error, which rclone returned to the
user.
Failed to create file system for "s3:bucket/path/": Forbidden: Forbidden
status code: 403, request id: XXXX, host id:
Previous to this change
53aa03cc44 s3: complete sse-c implementation
rclone would assume any errors when HEAD-ing the object implied it
didn't exist and this test would not fail.
This change reverts the functionality of the test to work as it did
before, meaning any errors on HEAD will make rclone assume the object
does not exist and the path is referring to a directory.
Fixes#4990
This implements polling support for the Dropbox backend. The Dropbox SDK dependency had to be updated due to an auth issue, which was fixed on Jan 12 2021. A secondary internal Dropbox service was created to handle unauthorized SDK requests, as is necessary when using the ListFolderLongpoll function/endpoint. The config variable was renamed to cfg to avoid potential conflicts with the imported config package.
Sharepoint 2016 returns status 204 to the purge request
even if the directory to purge does not really exist.
This change adds an extra check to detect this condition
and returns a proper error code.
The go-ntlmssp NTLM negotiator has to try various authentication methods.
Intermediate responses from Sharepoint have status code 401, only the
final one is different. When rclone runs a large operation in parallel
goroutines according to --checkers or --transfers, one of threads can
receive intermediate 401 response targeted for another one and returns
the 401 authentication error to the user.
This patch fixes that.
On-premises Sharepoint returns HTTP errors 400 or 500 in
reply to attempts to use file names with special characters
like hash, percent, tilde, invalid UTF-7 and so on.
This patch activates transparent encoding of such characters.
As per Microsoft documentation, Windows authentication
(NTLM/Kerberos/Negotiate) is not supported with HTTP/2.
This patch disables transparent HTTP/2 support when the
vendor setting is "sharepoint-ntlm". Otherwise connections
to IIS/10.0 can fail with HTTP_1_1_REQUIRED.
Co-authored-by: Georg Neugschwandtner <georg.neugschwandtner@gmx.net>
The most popular keyword for the Sharepoint in-house or company
installations is "On-Premises".
"Microsoft OneDrive account" is in fact just a Microsoft account.
Co-authored-by: Georg Neugschwandtner <georg.neugschwandtner@gmx.net>
Add new option option "sharepoint-ntlm" for the vendor setting.
Use it when your hosted Sharepoint is not tied to the OneDrive
accounts and uses NTLM authentication.
Also add documentation and integration test.
Fixes: #2171
S3 backend shared_credentials_file option wasn't working neither from
config option nor from command line option. This was caused cause
shared_credentials_file_provider works as part of chain provider, but in
case user haven't specified access_token and access_key we had removed
(set nil) to credentials field, that may contain actual credentials got
from ChainProvider.
AWS_SHARED_CREDENTIALS_FILE env varible as far as i understood worked,
cause aws_sdk code handles it as one of default auth options, when
there's not configured credentials.
This change adds the scopes rclone wants during the oauth request.
Previously rclone left these blank to get a default set.
This allows rclone to add the "members.read" scope which is necessary
for "impersonate" to work, but only when it is in use as it require
authorisation from a Team Admin.
See: https://forum.rclone.org/t/dropbox-no-members-read/22223/3
Some virtual filesystems (such as Google Drive File Stream) may
incorrectly set the actual file size equal to the preallocated space,
causing checksum and file size checks to fail.
This flag can be used to disable preallocation for local backends of
this type.
Before this change, if an application key limited to a prefix was in
use, with trailing `/` marking the folders then rclone would HEAD the
path without a trailing `/` to work out if it was a file or a folder.
This returned a permission denied error, which rclone returned to the
user.
Failed to create file system for "b2:bucket/path/":
failed to HEAD for download: Unknown 401 (401 unknown)
This change assumes any errors on HEAD will make rclone assume the
object does not exist and the path is referring to a directory.
See: https://forum.rclone.org/t/b2-error-on-application-key-limited-to-a-prefix/22159/
Lesmiscore
albertony
Leroy van Logchem
Nick Craig-Wood
Nick Gooding
rafma0
Berkan Teber
GuoXingbin
Nil Alexandrov
jaKa
Ivan Andreev
ctrl-q
Márton Elek
Abhiraj
Eng Zer Jun
Gourav T
Isaac Levy
Charlie Jiang
Yunhai Luo
Niels van de Weem
Kim
Logeshwaran Murugesan
GGG KILLER
lindwurm
deinferno
Sinan Tan
Max Sum
thomae
Andy Jackson
Fredric Arklid
Borna Butkovic
bbabich
database64128
Vitor Arruda
Roberto Ricci
Atílio Antônio
Felix Bünemann
Dmitry Bogatov
Matthew Sevey
Ian Levesque
Fred
Rajat Goel
Logeshwaran
Alfonso Montero
YenForYang
Jonta
Tatsuya Noyori
Parth Shukla
Ken Enrique Morel
Alex Chen
buengese
Chuan Zh
Dmitry Sitnikov
Xuanchen Wu
Florian Penzkofer
Chris Lu
Alexey Ivanov
Antoon Prins
Caleb Case
Jeffrey Tolar
OleFrost
Ansh Mittal
Cnly
Dominik Mydlil
Nick Gaya
nguyenhuuluan434
Manish Kumar
Lucas Messenger
Saksham Khanna
Robert Thomas
Maxwell Calman
georne
Rauno Ots
Dmitry Chepurovskiy
Vesnyx
David Sze