config: improved punctuation in initial config prompt

docs/content/alias.md

@@ -33,7 +33,7 @@ First run:
 This will guide you through an interactive setup process:
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 q) Quit config

docs/content/amazonclouddrive.md

@@ -53,7 +53,7 @@ Here is an example of how to make a remote called `remote`.  First run:
 This will guide you through an interactive setup process:
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 r) Rename remote
 c) Copy remote

docs/content/azureblob.md

@@ -19,7 +19,7 @@ configuration.  For a remote called `remote`.  First run:
 This will guide you through an interactive setup process:
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 q) Quit config

docs/content/b2.md

@@ -23,7 +23,7 @@ recommended method. See below for further details on generating and using
 an Application Key.
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 q) Quit config
 n/q> n

docs/content/box.md

@@ -22,7 +22,7 @@ Here is an example of how to make a remote called `remote`.  First run:
 This will guide you through an interactive setup process:
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 q) Quit config

docs/content/cache.md

@@ -34,7 +34,7 @@ Here is an example of how to make a remote called `test-cache`.  First run:
 This will guide you through an interactive setup process:
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 r) Rename remote
 c) Copy remote

docs/content/chunker.md

@@ -25,7 +25,7 @@ Now configure `chunker` using `rclone config`. We will call this one `overlay`
 to separate it from the `remote` itself.
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 q) Quit config

docs/content/crypt.md

@@ -86,7 +86,7 @@ configure a dedicated path for encrypted content, and access it
 exclusively through a crypt remote.
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 q) Quit config

docs/content/drive.md

@@ -22,7 +22,7 @@ Here is an example of how to make a remote called `remote`.  First run:
 This will guide you through an interactive setup process:
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 r) Rename remote
 c) Copy remote

docs/content/fichier.md

@@ -25,7 +25,7 @@ Here is an example of how to make a remote called `remote`.  First run:
 This will guide you through an interactive setup process:
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 q) Quit config

docs/content/filefabric.md

@@ -23,7 +23,7 @@ Here is an example of how to make a remote called `remote`.  First run:
 This will guide you through an interactive setup process:
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 q) Quit config

docs/content/ftp.md

@@ -27,7 +27,7 @@ For an anonymous FTP server, use `anonymous` as username and your email
 address as password.
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 r) Rename remote
 c) Copy remote

docs/content/googlephotos.md

@@ -26,7 +26,7 @@ Here is an example of how to make a remote called `remote`.  First run:
 This will guide you through an interactive setup process:
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 q) Quit config

docs/content/hasher.md

@@ -28,7 +28,7 @@ Now proceed to interactive or manual configuration.
 
 Run `rclone config`:
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 q) Quit config

docs/content/hdfs.md

@@ -19,7 +19,7 @@ Here is an example of how to make a remote called `remote`. First run:
 This will guide you through an interactive setup process:
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 q) Quit config

docs/content/http.md

@@ -24,7 +24,7 @@ run:
 This will guide you through an interactive setup process:
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 q) Quit config

docs/content/jottacloud.md

@@ -69,7 +69,7 @@ Here is an example of how to make a remote called `remote` with the default setu
 This will guide you through an interactive setup process:
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 q) Quit config

docs/content/koofr.md

@@ -23,7 +23,7 @@ Here is an example of how to make a remote called `koofr`.  First run:
 This will guide you through an interactive setup process:
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 q) Quit config

docs/content/mailru.md

@@ -32,7 +32,7 @@ account and choose a tariff, then run
 This will guide you through an interactive setup process:
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 q) Quit config

docs/content/mega.md

@@ -27,7 +27,7 @@ Here is an example of how to make a remote called `remote`.  First run:
 This will guide you through an interactive setup process:
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 q) Quit config

docs/content/memory.md

@@ -18,7 +18,7 @@ You can configure it as a remote like this with `rclone config` too if
 you want to:
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 q) Quit config

docs/content/pcloud.md

@@ -21,7 +21,7 @@ Here is an example of how to make a remote called `remote`.  First run:
 This will guide you through an interactive setup process:
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 q) Quit config

docs/content/premiumizeme.md

@@ -21,7 +21,7 @@ Here is an example of how to make a remote called `remote`.  First run:
 This will guide you through an interactive setup process:
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 q) Quit config

docs/content/putio.md

@@ -23,7 +23,7 @@ Here is an example of how to make a remote called `remote`.  First run:
 This will guide you through an interactive setup process:
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 q) Quit config

docs/content/qingstor.md

@@ -17,7 +17,7 @@ Here is an example of making an QingStor configuration.  First run
 This will guide you through an interactive setup process.
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 r) Rename remote
 c) Copy remote

docs/content/s3.md

@@ -58,7 +58,7 @@ First run
 This will guide you through an interactive setup process.
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 q) Quit config
@@ -2123,7 +2123,7 @@ To configure access to IBM COS S3, follow the steps below:
 1. Run rclone config and select n for a new remote.
 ```
 	2018/02/14 14:13:11 NOTICE: Config file "C:\\Users\\a\\.config\\rclone\\rclone.conf" not found - using defaults
-	No remotes found - make a new one
+	No remotes found, make a new one?
 	n) New remote
 	s) Set configuration password
 	q) Quit config
@@ -2462,7 +2462,7 @@ Wasabi provides an S3 interface which can be configured for use with
 rclone like this.
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 n/s> n
@@ -2574,7 +2574,7 @@ configuration.  First run:
 This will guide you through an interactive setup process.
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 q) Quit config
@@ -2684,7 +2684,7 @@ To configure access to Tencent COS, follow the steps below:
 
 ```
 rclone config
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 q) Quit config

docs/content/seafile.md

@@ -29,7 +29,7 @@ This will guide you through an interactive setup process. To authenticate
 you will need the URL of your server, your email (or username) and your password.
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 q) Quit config
@@ -118,7 +118,7 @@ excess files in the library.
 Here's an example of a configuration in library mode with a user that has the two-factor authentication enabled. Your 2FA code will be asked at the end of the configuration, and will attempt to authenticate you:
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 q) Quit config

docs/content/sftp.md

@@ -38,7 +38,7 @@ Here is an example of making an SFTP configuration.  First run
 This will guide you through an interactive setup process.
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 q) Quit config

docs/content/sharefile.md

@@ -20,7 +20,7 @@ Here is an example of how to make a remote called `remote`.  First run:
 This will guide you through an interactive setup process:
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 q) Quit config

docs/content/sia.md

@@ -64,7 +64,7 @@ First, run:
 This will guide you through an interactive setup process:
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 q) Quit config

docs/content/sugarsync.md

@@ -21,7 +21,7 @@ Here is an example of how to make a remote called `remote`.  First run:
 This will guide you through an interactive setup process:
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 q) Quit config

docs/content/swift.md

@@ -26,7 +26,7 @@ Here is an example of making a swift configuration.  First run
 This will guide you through an interactive setup process.
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 q) Quit config

docs/content/tardigrade.md

@@ -25,7 +25,7 @@ This will guide you through an interactive setup process:
 ### Setup with access grant
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 q) Quit config
@@ -67,7 +67,7 @@ y/e/d> y
 ### Setup with API key and passphrase
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 q) Quit config

docs/content/union.md

@@ -34,7 +34,7 @@ First run:
 This will guide you through an interactive setup process:
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 q) Quit config

docs/content/webdav.md

@@ -22,7 +22,7 @@ Here is an example of how to make a remote called `remote`.  First run:
 This will guide you through an interactive setup process:
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 q) Quit config

docs/content/yandex.md

@@ -16,7 +16,7 @@ Here is an example of making a yandex configuration.  First run
 This will guide you through an interactive setup process:
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 n/s> n

docs/content/zoho.md

@@ -16,7 +16,7 @@ Here is an example of making a zoho configuration.  First run
 This will guide you through an interactive setup process:
 
 ```
-No remotes found - make a new one
+No remotes found, make a new one?
 n) New remote
 s) Set configuration password
 n/s> n

fs/config/ui.go

@@ -611,7 +611,7 @@ func EditConfig(ctx context.Context) (err error) {
 			ShowRemotes()
 			fmt.Printf("\n")
 		} else {
-			fmt.Printf("No remotes found - make a new one\n")
+			fmt.Printf("No remotes found, make a new one?\n")
 			// take 2nd item and last 2 items of menu list
 			what = append(what[1:2], what[len(what)-2:]...)
 		}