--- date: "2019-04-02T17:06:00+01:00" title: "Logging Configuration" slug: "logging-configuration" weight: 40 toc: false draft: false menu: sidebar: parent: "administration" name: "Logging Configuration" weight: 40 identifier: "logging-configuration" --- # Logging Configuration The logging configuration of Gitea mainly consists of 3 types of components: - The `[log]` section for general configuration - `[log.]` sections for the configuration of different log outputs - `[log..]` sections for output specific configuration of a log group As mentioned below, there is a fully functional log output by default, so it is not necessary to define one. **Table of Contents** {{< toc >}} ## Collecting Logs for Help To collect logs for help and issue report, see [Support Options]({{< relref "doc/help/seek-help.en-us.md" >}}). ## The `[log]` section Configuration of logging facilities in Gitea happen in the `[log]` section and it's subsections. In the top level `[log]` section the following configurations can be placed: - `ROOT_PATH`: (Default: **%(GITEA_WORK_DIR)/log**): Base path for log files - `MODE`: (Default: **console**) List of log outputs to use for the Default logger. - `ROUTER`: (Default: **console**): List of log outputs to use for the Router logger. - `ACCESS`: List of log outputs to use for the Access logger. - `XORM`: (Default: **,**) List of log outputs to use for the XORM logger. - `ENABLE_ACCESS_LOG`: (Default: **false**): whether the Access logger is allowed to emit logs - `ENABLE_XORM_LOG`: (Default: **true**): whether the XORM logger is allowed to emit logs For details on the loggers check the "Log Groups" section. Important: log outputs won't be used if you don't enable them for the desired loggers in the corresponding list value. Lists are specified as comma separated values. This format also works in subsection. This section may be used for defining default values for subsections. Examples: - `LEVEL`: (Default: **Info**) Least severe log events to persist. Case insensitive. The full list of levels as of v1.17.3 can be read [here](https://github.com/go-gitea/gitea/blob/v1.17.3/custom/conf/app.example.ini#L507). - `STACKTRACE_LEVEL`: (Default: **None**) For this and more severe events the stacktrace will be printed upon getting logged. Some values are not inherited by subsections. For details see the "Non-inherited default values" section. ## Log outputs Log outputs are the targets to which log messages will be sent. The content and the format of the log messages to be saved can be configured in these. Log outputs are also called subloggers. Gitea provides 4 possible log outputs: - `console` - Log to `os.Stdout` or `os.Stderr` - `file` - Log to a file - `conn` - Log to a socket (network or unix) - `smtp` - Log via email By default, Gitea has a `console` output configured, which is used by the loggers as seen in the section "The log section" above. ### Common configuration Certain configuration is common to all modes of log output: - `MODE` is the mode of the log output. It will default to the sublogger name, thus `[log.console.router]` will default to `MODE = console`. For mode specific confgurations read further. - `LEVEL` is the lowest level that this output will log. This value is inherited from `[log]` and in the case of the non-default loggers from `[log.sublogger]`. - `STACKTRACE_LEVEL` is the lowest level that this output will print a stacktrace. This value is inherited. - `COLORIZE` will default to `true` for `console` as described, otherwise it will default to `false`. ### Non-inherited default values There are several values which are not inherited as described above but rather default to those specific to type of logger, these are: `EXPRESSION`, `FLAGS`, `PREFIX` and `FILE_NAME`. #### `EXPRESSION` `EXPRESSION` represents a regular expression that log events must match to be logged by the sublogger. Either the log message, (with colors removed), must match or the `longfilename:linenumber:functionname` must match. NB: the whole message or string doesn't need to completely match. Please note this expression will be run in the sublogger's goroutine not the logging event subroutine. Therefore it can be complicated. #### `FLAGS` `FLAGS` represents the preceding logging context information that is printed before each message. It is a comma-separated string set. The order of values does not matter. Possible values are: - `none` or `,` - No flags. - `date` - the date in the local time zone: `2009/01/23`. - `time` - the time in the local time zone: `01:23:23`. - `microseconds` - microsecond resolution: `01:23:23.123123`. Assumes time. - `longfile` - full file name and line number: `/a/b/c/d.go:23`. - `shortfile` - final file name element and line number: `d.go:23`. - `funcname` - function name of the caller: `runtime.Caller()`. - `shortfuncname` - last part of the function name. Overrides `funcname`. - `utc` - if date or time is set, use UTC rather than the local time zone. - `levelinitial` - Initial character of the provided level in brackets eg. `[I]` for info. - `level` - Provided level in brackets `[INFO]` - `medfile` - Last 20 characters of the filename - equivalent to `shortfile,longfile`. - `stdflags` - Equivalent to `date,time,medfile,shortfuncname,levelinitial` ### Console mode In this mode the logger will forward log messages to the stdout and stderr streams attached to the Gitea process. For loggers in console mode, `COLORIZE` will default to `true` if not on windows, or the windows terminal can be set into ANSI mode or is a cygwin or Msys pipe. Settings: - `STDERR`: **false**: Whether the logger should print to `stderr` instead of `stdout`. ### File mode In this mode the logger will save log messages to a file. Settings: - `FILE_NAME`: The file to write the log events to. For details see below. - `MAX_SIZE_SHIFT`: **28**: Maximum size shift of a single file. 28 represents 256Mb. For details see below. - `LOG_ROTATE` **true**: Whether to rotate the log files. TODO: if false, will it delete instead on daily rotate, or do nothing?. - `DAILY_ROTATE`: **true**: Whether to rotate logs daily. - `MAX_DAYS`: **7**: Delete rotated log files after this number of days. - `COMPRESS`: **true**: Whether to compress old log files by default with gzip. - `COMPRESSION_LEVEL`: **-1**: Compression level. For details see below. The default value of `FILE_NAME` depends on the respective logger facility. If unset, their own default will be used. If set it will be relative to the provided `ROOT_PATH` in the master `[log]` section. `MAX_SIZE_SHIFT` defines the maximum size of a file by left shifting 1 the given number of times (`1 << x`). The exact behavior at the time of v1.17.3 can be seen [here](https://github.com/go-gitea/gitea/blob/v1.17.3/modules/setting/log.go#L185). The useful values of `COMPRESSION_LEVEL` are from 1 to (and including) 9, where higher numbers mean better compression. Beware that better compression might come with higher resource usage. Must be preceded with a `-` sign. ### Conn mode In this mode the logger will send log messages over a network socket. Settings: - `ADDR`: **:7020**: Sets the address to connect to. - `PROTOCOL`: **tcp**: Set the protocol, either "tcp", "unix" or "udp". - `RECONNECT`: **false**: Try to reconnect when connection is lost. - `RECONNECT_ON_MSG`: **false**: Reconnect host for every single message. ### SMTP mode In this mode the logger will send log messages in email. It is not recommended to use this logger to send general logging messages. However, you could perhaps set this logger to work on `FATAL` messages only. Settings: - `HOST`: **127.0.0.1:25**: The SMTP host to connect to. - `USER`: User email address to send from. - `PASSWD`: Password for the smtp server. - `RECEIVERS`: Email addresses to send to. - `SUBJECT`: **Diagnostic message from Gitea**. The content of the email's subject field. ## Log Groups The fundamental thing to be aware of in Gitea is that there are several log groups: - The "Default" logger - The Router logger - The Access logger - The XORM logger There is also the go log logger. ### The go log logger Go provides its own extremely basic logger in the `log` package, however, this is not sufficient for our purposes as it does not provide a way of logging at multiple levels, nor does it provide a good way of controlling where these logs are logged except through setting of a writer. We have therefore redirected this logger to our Default logger, and we will log anything that is logged using the go logger at the INFO level. ### The "Default" logger Calls to `log.Info`, `log.Debug`, `log.Error` etc. from the `code.gitea.io/gitea/modules/log` package will log to this logger. You can configure the outputs of this logger by setting the `MODE` value in the `[log]` section of the configuration. Each output sublogger is configured in a separate `[log.sublogger.default]` which inherits from the sublogger `[log.sublogger]` section and from the generic `[log]` section, but there are certain default values. These will not be inherited from the `[log]` section: - `FLAGS` is `stdflags` (Equal to `date,time,medfile,shortfuncname,levelinitial`) - `FILE_NAME` will default to `%(ROOT_PATH)/gitea.log` - `EXPRESSION` will default to `""` - `PREFIX` will default to `""` The provider type of the sublogger can be set using the `MODE` value in its subsection, but will default to the name. This allows you to have multiple subloggers that will log to files. ### The "Router" logger The Router logger has been substantially changed in v1.17. If you are using the router logger for fail2ban or other monitoring you will need to update this configuration. You can disable Router log by setting `DISABLE_ROUTER_LOG` or by setting all of its sublogger configurations to `none`. You can configure the outputs of this router log by setting the `ROUTER` value in the `[log]` section of the configuration. `ROUTER` will default to `console` if unset and will default to same level as main logger. The Router logger logs the following: - `started` messages will be logged at TRACE level - `polling`/`completed` routers will be logged at INFO - `slow` routers will be logged at WARN - `failed` routers will be logged at WARN The logging level for the router will default to that of the main configuration. Set `[log..router]` `LEVEL` to change this. Each output sublogger for this logger is configured in `[log.sublogger.router]` sections. There are certain default values which will not be inherited from the `[log]` or relevant `[log.sublogger]` sections: - `FILE_NAME` will default to `%(ROOT_PATH)/router.log` - `FLAGS` defaults to `date,time` - `EXPRESSION` will default to `""` - `PREFIX` will default to `""` NB: You can redirect the router logger to send its events to the Gitea log using the value: `ROUTER = ,` ### The "Access" logger The Access logger is a new logger for version 1.9. It provides a NCSA Common Log compliant log format. It's highly configurable but caution should be taken when changing its template. The main benefit of this logger is that Gitea can now log accesses in a standard log format so standard tools may be used. You can enable this logger using `ENABLE_ACCESS_LOG`. Its outputs are configured by setting the `ACCESS` value in the `[log]` section of the configuration. `ACCESS` defaults to `file` if unset. Each output sublogger for this logger is configured in `[log.sublogger.access]` sections. There are certain default values which will not be inherited from the `[log]` or relevant `[log.sublogger]` sections: - `FILE_NAME` will default to `%(ROOT_PATH)/access.log` - `FLAGS` defaults to `` or None - `EXPRESSION` will default to `""` - `PREFIX` will default to `""` If desired the format of the Access logger can be changed by changing the value of the `ACCESS_LOG_TEMPLATE`. Please note, the access logger will log at `INFO` level, setting the `LEVEL` of this logger to `WARN` or above will result in no access logs. NB: You can redirect the access logger to send its events to the Gitea log using the value: `ACCESS = ,` #### The ACCESS_LOG_TEMPLATE This value represent a go template. It's default value is: `{{.Ctx.RemoteAddr}} - {{.Identity}} {{.Start.Format "[02/Jan/2006:15:04:05 -0700]" }} "{{.Ctx.Req.Method}} {{.Ctx.Req.URL.RequestURI}} {{.Ctx.Req.Proto}}" {{.ResponseWriter.Status}} {{.ResponseWriter.Size}} "{{.Ctx.Req.Referer}}\" \"{{.Ctx.Req.UserAgent}}"` The template is passed following options: - `Ctx` is the `context.Context` - `Identity` is the `SignedUserName` or `"-"` if the user is not logged in - `Start` is the start time of the request - `ResponseWriter` is the `http.ResponseWriter` Caution must be taken when changing this template as it runs outside of the standard panic recovery trap. The template should also be as simple as it runs for every request. ### The "XORM" logger The XORM logger is a long-standing logger that exists to collect XORM log events. It is enabled by default but can be switched off by setting `ENABLE_XORM_LOG` to `false` in the `[log]` section. Its outputs are configured by setting the `XORM` value in the `[log]` section of the configuration. `XORM` defaults to `,` if unset, meaning it is redirected to the main Gitea log. XORM will log SQL events by default. This can be changed by setting the `LOG_SQL` value to `false` in the `[database]` section. Each output sublogger for this logger is configured in `[log.sublogger.xorm]` sections. There are certain default values which will not be inherited from the `[log]` or relevant `[log.sublogger]` sections: - `FILE_NAME` will default to `%(ROOT_PATH)/xorm.log` - `FLAGS` defaults to `date,time` - `EXPRESSION` will default to `""` - `PREFIX` will default to `""` ## Debugging problems When submitting logs in Gitea issues it is often helpful to submit merged logs obtained by either by redirecting the console log to a file or copying and pasting it. To that end it is recommended to set your logging to: ```ini [database] LOG_SQL = false ; SQL logs are rarely helpful unless we specifically ask for them ... [log] MODE = console LEVEL = debug ; please set the level to debug when we are debugging a problem ROUTER = console COLORIZE = false ; this can be true if you can strip out the ansi coloring ENABLE_SSH_LOG = true ; shows logs related to git over SSH. ``` Sometimes it will be helpful get some specific `TRACE` level logging restricted to messages that match a specific `EXPRESSION`. Adjusting the `MODE` in the `[log]` section to `MODE = console,traceconsole` to add a new logger output `traceconsole` and then adding its corresponding section would be helpful: ```ini [log.traceconsole] ; traceconsole here is just a name MODE = console ; this is the output that the traceconsole writes to LEVEL = trace EXPRESSION = ; putting a string here will restrict this logger to logging only those messages that match this expression ``` (It's worth noting that log messages that match the expression at or above debug level will get logged twice so don't worry about that.) `STACKTRACE_LEVEL` should generally be left unconfigured (and hence kept at `none`). There are only very specific occasions when it useful. ## Empty Configuration The empty configuration is equivalent to: ```ini [log] ROOT_PATH = %(GITEA_WORK_DIR)/log MODE = console LEVEL = Info STACKTRACE_LEVEL = None ENABLE_ACCESS_LOG = false ENABLE_XORM_LOG = true XORM = , [log.console] MODE = console LEVEL = %(LEVEL) STACKTRACE_LEVEL = %(STACKTRACE_LEVEL) FLAGS = stdflags PREFIX = COLORIZE = true # Or false if your windows terminal cannot color ``` This is equivalent to sending all logs to the console, with default go log being sent to the console log too. ## Releasing-and-Reopening, Pausing and Resuming logging If you are running on Unix you may wish to release-and-reopen logs in order to use `logrotate` or other tools. It is possible force Gitea to release and reopen it's logging files and connections by sending `SIGUSR1` to the running process, or running `gitea manager logging release-and-reopen`. Alternatively, you may wish to pause and resume logging - this can be accomplished through the use of the `gitea manager logging pause` and `gitea manager logging resume` commands. Please note that whilst logging is paused log events below INFO level will not be stored and only a limited number of events will be stored. Logging may block, albeit temporarily, slowing Gitea considerably whilst paused - therefore it is recommended that pausing only done for a very short period of time. ## Adding and removing logging whilst Gitea is running It is possible to add and remove logging whilst Gitea is running using the `gitea manager logging add` and `remove` subcommands. This functionality can only adjust running log systems and cannot be used to start the access or router loggers if they were not already initialized. If you wish to start these systems you are advised to adjust the app.ini and (gracefully) restart the Gitea service. The main intention of these commands is to easily add a temporary logger to investigate problems on running systems where a restart may cause the issue to disappear. ## Log colorization Logs to the console will be colorized by default when not running on Windows. Terminal sniffing will occur on Windows and if it is determined that we are running on a terminal capable of color we will colorize. Further, on \*nix it is becoming common to have file logs that are colored by default. Therefore file logs will be colorised by default when not running on Windows. You can switch on or off colorization by using the `COLORIZE` value. From a development point of view. If you write `log.Info("A %s string", "formatted")` the `formatted` part of the log message will be Bolded on colorized logs. You can change this by either rendering the formatted string yourself. Or you can wrap the value in a `log.ColoredValue` struct. The `log.ColoredValue` struct contains a pointer to value, a pointer to string of bytes which should represent a color and second set of reset bytes. Pointers were chosen to prevent copying of large numbers of values. There are several helper methods: - `log.NewColoredValue` takes a value and 0 or more color attributes that represent the color. If 0 are provided it will default to a cached bold. Note, it is recommended that color bytes constructed from attributes should be cached if this is a commonly used log message. - `log.NewColoredValuePointer` takes a pointer to a value, and 0 or more color attributes that represent the color. - `log.NewColoredValueBytes` takes a value and a pointer to an array of bytes representing the color. These functions will not double wrap a `log.ColoredValue`. They will also set the `resetBytes` to the cached `resetBytes`. The `colorBytes` and `resetBytes` are not exported to prevent accidental overwriting of internal values. ## ColorFormat & ColorFormatted Structs may implement the `log.ColorFormatted` interface by implementing the `ColorFormat(fmt.State)` function. If a `log.ColorFormatted` struct is logged with `%-v` format, its `ColorFormat` will be used instead of the usual `%v`. The full `fmt.State` will be passed to allow implementers to look at additional flags. In order to help implementers provide `ColorFormat` methods. There is a `log.ColorFprintf(...)` function in the log module that will wrap values in `log.ColoredValue` and recognise `%-v`. In general it is recommended not to make the results of this function too verbose to help increase its versatility. Usually this should simply be an `ID`:`Name`. If you wish to make a more verbose result, it is recommended to use `%-+v` as your marker. ## Log Spoofing protection In order to protect the logs from being spoofed with cleverly constructed messages. Newlines are now prefixed with a tab and control characters except those used in an ANSI CSI are escaped with a preceding `\` and their octal value. ## Creating a new named logger group Should a developer wish to create a new named logger, `NEWONE`. It is recommended to add an `ENABLE_NEWONE_LOG` value to the `[log]` section, and to add a new `NEWONE` value for the modes. A function like `func newNewOneLogService()` is recommended to manage construction of the named logger. e.g. ```go func newNewoneLogService() { EnableNewoneLog = Cfg.Section("log").Key("ENABLE_NEWONE_LOG").MustBool(false) Cfg.Section("log").Key("NEWONE").MustString("file") // or console? or "," if you want to send this to default logger by default if EnableNewoneLog { options := newDefaultLogOptions() options.filename = filepath.Join(LogRootPath, "newone.log") options.flags = "stdflags" options.bufferLength = Cfg.Section("log").Key("BUFFER_LEN").MustInt64(10000) generateNamedLogger("newone", options) } } ``` You should then add `newOneLogService` to `NewServices()` in `modules/setting/setting.go` ## Using `logrotate` instead of built-in log rotation Gitea includes built-in log rotation, which should be enough for most deployments. However, if you instead want to use the `logrotate` utility: - Disable built-in log rotation by setting `LOG_ROTATE` to `false` in your `app.ini`. - Install `logrotate`. - Configure `logrotate` to match your deployment requirements, see `man 8 logrotate` for configuration syntax details. In the `postrotate/endscript` block send Gitea a `USR1` signal via `kill -USR1` or `kill -10` to the `gitea` process itself, or run `gitea manager logging release-and-reopen` (with the appropriate environment). Ensure that your configurations apply to all files emitted by Gitea loggers as described in the above sections. - Always do `logrotate /etc/logrotate.conf --debug` to test your configurations. - If you are using docker and are running from outside of the container you can use `docker exec -u $OS_USER $CONTAINER_NAME sh -c 'gitea manager logging release-and-reopen'` or `docker exec $CONTAINER_NAME sh -c '/bin/s6-svc -1 /etc/s6/gitea/'` or send `USR1` directly to the Gitea process itself. The next `logrotate` jobs will include your configurations, so no restart is needed. You can also immediately reload `logrotate` with `logrotate /etc/logrotate.conf --force`.